Quick Start Guide

After Sales Support TEL: [phone] WEB: www.traveler-service.com/au
digital video camera
5.0 megapixels
8x digital zoom
Model Number: DV-5060
quick set-up guide
Easy steps to getting started
traveler
After Sales Support TEL: [phone] WEB: www.traveler-service.com/au
EN-1
GETTING TO KNOW YOUR DIGITAL VIDEO
CAMERA
Front View
1. Speaker
2. Focus switch
Normal mode
Macro mode
3. Lens
4. LED lights
5. Microphone
6. Battery/memory card cover
7. Tripod socket
7
1
2
5
3
6
4
This Quick Start Guide is only for quick reference. For more details on
advanced functions, you can refer to your user’s manual.
EN-2
After Sales Support TEL: [phone] WEB: www.traveler-service.com/au
Rear View
2
4
1
5 6
3
7
9
8
11
14
10
12
13
1. LCD monitor
2. Power button
3. W Left button
Self-timer button
4. / Zoom out (wide-angle)
button / Thumbnail button
/ Zoom in (telephoto)
button
5. S Up button
MODE Mode button
6. X Right button
Camera mode quick key
7. OK/Shutter button
8. T Down button
MENU Menu!button
9. Status LED indicator
10. USB connector
11. SD/SDHC memory card slot
12. A/V OUT terminal
13. Earphones connector
14.Strap holder
After Sales Support TEL: [phone] WEB: www.traveler-service.com/au
EN-3
GETTING STARTED
Preparation
1. Attach the camera strap.
2. Open the battery/memory card cover.
3. Insert the supplied batteries with correct orientation
as shown.
4. Insert an SD/SDHC memory card (Optional).
 The video camera has 64MB internal memory,
but you can load an SD/SDHC memory card to
expand its memory capacity.
 Be sure to format the SD/SDHC memory card
with this video camera before its initial usage.
 Close the battery/memory card cover and make
sure it is locked securely.
EN-4
After Sales Support TEL: [phone] WEB: www.traveler-service.com/au
Turning the Power On/Off
Load the batteries and insert an SD/SDHC memory card before starting.
 Press the button until the digital video
camera turns on.
 To turn the power off, press the button
again.
CAPTURE MODE
Your digital video camera is equipped with a 2.36" full color LTPS-TFT LCD monitor to help
you capture/playback images and video clips or adjust menu settings.
Recording Video Clips
1. Press the button until the digital video camera
turns on
2. Compose the image on the LCD monitor.
3. Press the button to start recording.
4. Press the button again to stop recording.
 The recording time depends on the storage media
size and the subject to be recorded.
Capturing Still Images
1. Press the button until the digital video camera
turns on.
2. Press the MODE button or button (camera mode
quick key) to enter Capture Mode.
3. Compose the image on the LCD monitor.
4. Press the button to capture the image.
00:02:05
00:02:05
00:02:05
9999
9999
9999
10s
10s
10s
5m
5m
After Sales Support TEL: [phone] WEB: www.traveler-service.com/au
EN-5
PLAYBACK MODE
Playing Back Video Clips
1. Press the MODE button until the [Select Mode]
menu is displayed.
2. Select [Image/Movie] with the c / d buttons, then
press the button.
 The last recorded image/video clip appears on
the LCD monitor.
3. Select the desired video clip with the e / f buttons.
4. Press the button to start video playback.
 To pause video playback, press the button.
 To cancel pause, press the button again.
 The volume may be adjusted by pressing the
or button.
5. To stop video playback, press the d button and
return to the start of the video clip.
Playing Back Still Images
1. Press the MODE button until the [Select Mode]
menu is displayed.
2. Select [Image/Movie] with the c / d buttons, then
press the button.
 The last recorded image/video clip appears on
the LCD monitor.
3. Select the desired image with the e / f buttons.
4. The images can be displayed in reverse or forward
sequence with the e / f buttons.
5. Press the / button to adjust the zoom ratio.
The magnification factor is displayed on the LCD
monitor.
6. To view different portion of the images, press the c /
d / e / f button to adjust the display area.
:
Image / Movie
MP3
Audio
OK
Select Mode
Play / Pause
Play / Pause
101-0001
101-0001
00:00:00
00:00:00
00:00:00
Play / Pause
101-0001
:
Image / Movie
MP3
Audio
OK
Select Mode
2X
2X
2X
EN-6
After Sales Support TEL: [phone] WEB: www.traveler-service.com/au
Deleting Still Images/Video Clips
1. Press the MODE button until the [Select Mode] menu
is displayed.
2. Select [Image/Movie] with the c / d buttons, then
press the button.
3. Select the image/video clip you wish to delete with the
e / f buttons.
4. Press the MENU button.
5. Select [Delete File] or [Delete All] with the c / d
buttons and press the button.
 [Delete File]: Deletes the current image/video clip.
 [Delete All]: Deletes all images/video clips.
6. Select [Yes] and to delete. Select [No] to cancel.
7. Press the button to confirm.
:
Exit
:
Slide Show
Delete File
Delete All
Protect
Copy to Card
Next Menu
Single
Yes
OK
Play
No
Yes
After Sales Support TEL: [phone] WEB: www.traveler-service.com/au
EN-7
TRANSFERRING FILES TO YOUR
COMPUTER
System Requirement
Downloading / Deleting Your Files via Computer
1. Press the button until the digital video camera turns on.
2. Connect one end of the USB cable to the USB terminal of
the digital video camera.
3. Connect the other end of the USB cable to an available
USB port on your computer.
4. Select [PC] with the c / d buttons, and press the
button .
5. From the Windows desktop, double click on “My
Computer”.
6. Look for a new “removable disk” icon.
 This “removable disk” is actually the memory (or memory card) in your video camera.
Typically, the video camera will be assigned drive letter “E” or higher.
7. Double click on the removable disk and locate the DCIM folder.
8. Double click on the DCIM folder to open it to find more folders.
 Your recorded images, video clips, audio, and MP3 files will be inside these folders.
9. Copy and paste or drag and drop files to a folder on your computer.
10. To delete files, simply select the unwanted files and delete.
Mac users: Double-click the “untitled” or “unlabeled” disk drive icon on your desktop. iPhoto
may automatically launch.
Windows Macintosh
 Pentium 166 MHz or higher
 Windows 2000/XP/Vista
 128MB RAM
 128MB hard disk space
 CD-ROM drive
 Available USB port
 PowerPC G3/G4/G5
 OS 9.0 or later
 128MB RAM
 128MB hard disk space
 CD-ROM drive
 Available USB port
:
PC
PC Cam
Pictbridge
OK
USB Mode
Next Menu
D