Operation Manual

Helpline No. UK/Ireland 00800/7877 2368

Web Support www.Traveler-service.com/uk

Model Number: IS 12

Connecting to a PictBridge Compliant Printer

If a printer that supports PictBridge is available, images can be printed by connecting the dig-

ital still camera directly to the PictBridge-compatible printer without using a computer.

Connecting the camera to the printer

1. Connect one end of the USB cable to your

camera.

2. Connect the other end of the USB cable to

the USB port on the printer.

3. Turn on your camera.

4. The [USB] screen is displayed. Select

[PictBridge] with the

c / d

buttons, and press

the button

Printing images

When the camera is properly connected to a Pict-

Bridge compliant printer, the PictBridge menu is displayed on the monitor.

1. Select the item you want to configure with the

c / d buttons, and press the button.



[Images]:Select whether you want to print

specific image or all images. You may also

select the printing number for a specific image.



[Date Print]:According to the printer type,

select whether you want to print the image

with date imprint or not.

 [Paper Size]:Select the desired paper size

according to the printer type.

 [Layout]:Select the desired printing layout according to the printer type.

 [Print]:After all settings are configured, select this item to start printing.

2. If you select [Images] in the previous step,

the figure shown on the right hand side will

appear. Select [Single], [All] or [DPOF] with

the c / d buttons, and press the button.

 [Single]:Select to print one specific image.

 [All]:Select to print all images.

 [DPOF]:Select to print images with DPOF

settings.

 [Exit]:Exit from Images option.

APPENDIX