Instructions

20
EZ-PEAK LIVE
The EZ-Peak Live charger is set by default to only charge iD-
equipped batteries. You must turn off iD-Only Mode on the
Advanced Charger Settings screen of the app to manually
configure the charger settings to charge non-iD batteries.
You can also turn on and set up the passcode-protected safety
lock on this same screen.
2. Use the EZ-Peak Live App to select the battery type,
battery capacity, charge rate, and charging mode
(LiPo only).
The Charge Settings Wizard takes you through the setup
process by asking you questions about the battery you are
charging. Follow the instructions in the app.
Charge Settings Wizard
Advanced Charger Settings