TRA83076-4 4-Tec 2.0 VXL Chassis Manual

TRAXXAS

•

ADJUSTING YOUR MODEL

Dual Rear Camber Link Mounts

There are two separate

mounting points for the

rear camber links. Changing

the location does not affect

performance, but will allow

the use of different bodies.

The lower mounting points

should be used with low-

proﬁle bodies; the upper

mounting points will work

with most body styles. Both

mounting points feature

two holes for wheel camber

adjustment. Moving the links from the standard holes to the outer

holes will increase camber and slightly reduce roll stiffness. This

modiﬁcation also requires adjustable camber links (part #8341X, sold

separately) to lengthen the links and ensure proper camber settings.

Suspension Droop Adjustment

Suspension droop is the amount of downward travel on the wheels

(how much the suspension arm hangs down when the chassis is

off the ground). Molded screw bosses in the suspension arms allow

you to adjust droop by using a 4mm set screw (part #4897, sold

separately). Tightening the screw will decrease droop and allow you

to tune the suspension for better stability when cornering.

UPPER

MOUNTING

LOWER

MOUNTING

Mounting Holes