X-Maxx 8s (77086-4) Manual

X-MAXX
•
7
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Traxxas Ultra Premium Tire
Glue, Part #6468 (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Phillips screwdriver
For more information on
batteries, see Use the Right
Batteries on page 13.
TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT
REMOVING AND INSTALLING THE BODY
Your model comes with a set of specialty metric tools. You’ll need to purchase other items, available from your hobby dealer, to operate
and maintain your model.
Supplied Tools and Equipment
Required Equipment
*Battery and charger style are subject to change and may vary from images.
4 AA alkaline
batteries
LiPo battery charger
EZ-Peak Live
™
(part #2971,
sold separately)
Traxxas Power Cell Batteries
(part #2914,
sold separately)
Your X-Maxx includes an innovative latching system for securing the
body to the chassis. To remove the body for chassis access:
1. Turn the handle 90 degrees counterclockwise to unlock the
body latch.
2. Open the latch to release the truck body from the rear
shock tower.
3. Gently lift the rear of the body. Do not lift too far or the body will
become difficult to remove.
4. Slide the body backward away from the front shock tower to
release the front body tab. (Installation of the body is the reverse
of removal.)
5. Practice this a few times until you become familiar with the
latching mechanism. The more you do it, the faster you will be.
2.0mm “L”
wrench
2.5mm “T”
wrench
17mm wheel nut
wrench
Battery pack spacers
2.5mm “L”
wrench
Optional spur gear
(speed gear)
2 LiPo batteries with Traxxas
High-Current Connectors
Traxxas Power Cell LiPo batteries
recommended
Minimum: 5000mAh 11.1v 3-cell (3S)
Recommended: 6700mAh 14.8v 4-cell (4S)
Traxxas Power Cell LiPo Battery
(part #2890X, sold separately)