TRA58076-74 Slash VXL RTR 2WD Short Course Truck - Parts List

Page 4 Slash VXL: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model 58076-74) Parts List
BFGoodrich
®
Tires Trademarks ar e used under l icense from Michel in Group Companies. R EV. 220329 1258
2656T
Shock shafts, hardened steel, titanium nitride coated (xx-long)
(2)
1664
Shock shaf ts, steel, chrome f inish (long) (2)
2656
Shock shafts, steel, chrome f inish (xx-long) (2)
1765
Silicone diaphragms (4)
2668
Spring retainers, upper & lower (2)/ spring pre-load spacers:
1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore
Shocks)
5860
Springs, front (white) (progressive rate) (2) (fits #5862 aluminum
Big Bore shocks)
5859
Springs, rear (white) (progressive rate) (2) (fits #5862 aluminum
Big Bore shocks)
Shocks (Ultra Shocks)
3765A
Body , Ultra Shock(s) (long) (gray ) (2)
3766A
Body , Ultra Shock(s) (XXL) (gray ) (2)
2362
Rebuild kit, Ultra shocks (for 2 shocks)
1942
Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws
(2)
2742X
Rod ends, short (6)/ hollow balls (6)
3767
Shock caps (2)/ shock bottoms (2)
8361
Shock caps (black) (4) (assembled with hollow balls)
3767A
Shock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks)
3767G
Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)
3767T
Shock caps, aluminum (orange-anodized) (4) (fits all Ultra
Shocks)
3767P
Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)
3767X
Shock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)
1664T
Shock shafts, hardened steel, titanium nitride coated (long) (2)
2656T
Shock shafts, hardened steel, titanium nitride coated (xx-long)
(2)
1664
Shock shafts, steel, chrome finish (long) (2)
2656
Shock shafts, steel, chrome f inish (xx-long) (2)
3642X
Shoulder screws, Ultra Shocks (3x12 hex drive) (6)
1765
Silicone diaphragms (4)
3769
Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)
3768
Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole
(2))
2458
Springs, front (black) (2)
2458P
Springs, front (pink) (2)
5857P
Springs, front (pink) (progressive rate) (2)
2458A
Springs, front (white) (2)
5857
Springs, f ront (white) (progressiv e rate) (2)
3757
Springs, rear (black) (2)
3757T
Springs, rear (blue) (2)
3757A
Springs, rear (green) (2)
3757P
Springs, rear (pink) (2)
5858P
Springs, rear (pink) (progressive rate) (2)
3757X
Springs, rear (white) (2)
5858
Springs, rear (white) (progressiv e rate) (2)
4957
Springs, red (for Ultra Shocks only) (2.5 rate) (f/r) (2)
3760
Ultra Shocks (black) (long) (complete w/ spring pre-load spacers
& springs) (front) (2)
3762
Ultra Shocks (black) (xx-long) (complete w/ spring pre-load
spacers & springs) (rear) (2)
3760A
Ultra Shocks (gray ) (long) (complete w/ spring pre-load spacers &
springs) (2)
3762A
Ultra Shocks (gray ) (xx-long) (complete w/ spring pre-load spacers &
springs) (rear) (2)
Slipper Clutch Components
9494
Input gear, 22-tooth/ input shaf t (transmission) (heav y duty) (fits
Bandit®, Rustler®, Stampede®, Slash 2WD)
3793
Input shaft (slipper shaft) / spring pin
5552X
Rebuild kit, slipper clutch (steel disc/ f riction pads (3)/ spring (2)/ pin/
4.0mm NL (1)/ 5.0mm NL (1))
2554
Screws, 3x6mm cap-head machine (hex driv e) (6)
5556
Slipper pressure plate & hub (aluminum alloy )
Spur Gears & Pinion Gears
9491
Gear adapter set, f ixed (48-pitch)
2416
Gear, 16-T pinion (48-pitch) / set screw
1918
Gear, 18-T pinion (48-pitch) / set screw
2419
Gear, 19-T pinion (48-pitch) / set screw
2422
Gear, 22-T pinion (48-pitch) (fits 3mm shaft)/ set screw
2423
Gear, 23-T pinion (48-pitch) (fits 3mm shaft)/ set screw
2426
Gear, 26-T pinion (48-pitch) (fits 3mm shaft)/ set screw
2429
Gear, 29-T pinion (48-pitch) (fits 3mm shaft)/ set screw
2431
Gear, 31-T pinion (48-pitch) (fits 3mm shaft)/ set screw
4725
Gear, pinion (25-tooth) (48-pitch) / set screw
4728
Gear, pinion (28-tooth) (48-pitch) (fits 3mm shaf t)/ set screw
4676
Spur gear, 76-tooth (48-pitch) (for models with Torque-Control
slipper clutch)
4683
Spur gear, 83-tooth (48-pitch) (for models with Torque-Control
slipper clutch)
4686
Spur gear, 86-tooth (48-pitch) (f or models with Torque-Control slipper
clutch)
4690
Spur gear, 90-tooth (48-pitch) (for models with Torque-Control
slipper clutch)
Steering Components
2728
Ball bearings (5x8x2.5mm) (2)
2545
Bellcrank bushings (plastic) (5x8x2.5mm) (4)
6846
Linkage, steering (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls
(2)
1985
PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
2742
Rod ends, long (6)/ hollow ball connectors (6)
5347
Rod ends, Rev o® (large) with hollow balls (12)
3744
Servo saver w/adapters
3967
Shoulder screws 3x10 (6) (without threadlock)
3743
Steering bellcranks (l&r)/ draglink
3743A
Steering bellcranks, drag link (blue-anodized T6 aluminum)/
5x8mm ball bearings (4) hardware (assembled) (requires #3744
servo saver w/adapters)
3743G
Steering bellcranks, drag link (green-anodized 6061-T6
aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
3743T
Steering bellcranks, drag link (orange-anodized 6061-T6
aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
3743P
Steering bellcranks, drag link (pink-anodized 6061-T6 aluminum)/
5x8mm ball bearings (4)/ hardware (assembled)
3743X
Steering bellcranks, drag link (red-anodized T6 aluminum)/
5x8mm ball bearings (4) hardware (assembled) (requires #3744
servo saver w/adapters)
6845X
Steering bellcranks/ serv o sav er/ serv o saver spring/ serv o spring
retainer/serv o horn, steering
1935
Turnbuckles, 36mm (2)
3139A
Turnbuckles, aluminum (blue-anodized), toe links, 59mm (2)
(assembled w/ rod ends & hollow balls) (requires 5mm aluminum
wrench #5477)
3139G
Turnbuckles, aluminum (green-anodized), toe links, 59mm (2)
(assembled w/ rod
ends & hollow balls) (requires 5mm aluminum
wrench #5477)
3139T
Turnbuckles, aluminum (orange-anodized), toe links, 59mm (2)
(assembled w/ rod ends & hollow balls) (requires 5mm aluminum
wrench #5477)
3139P
Turnbuckles, aluminum (pink-anodized), toe links, 59mm (2)
(assembled w/ rod ends & hollow balls) (requires 5mm aluminum
wrench #5477)
3139X
Turnbuckles, aluminum (red-anodized), toe links, 59mm (2)
(assembled with rod ends &
hollow balls) (requires 5mm
aluminum wrench #5477)
3745
Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled
with rod ends and hollow balls)
2746
Washers, 3x6mm metal (12)
Suspension Linkage
5525
Rod ends (12)/ hollow balls (12)
5347
Rod ends, Rev o® (large) with hollow balls (12)
3739
Screw pin set (Rustler®, Bandit®, Stampede®)
5529
Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls,
captured (4)
2640
Suspension pins, 44mm (2) w/ e-clips
3640
Suspension screw pin set, steel (hex driv e) (requires part #2640 f or a
complete suspension pin set) (Bandit®, Rustler®, Stampede®)
3139A
Turnbuckles, aluminum (blue-anodized), toe links, 59mm (2)
(assembled w/ rod ends &
hollow balls) (requires 5mm aluminum
wrench #5477)
3139G
Turnbuckles, aluminum (green-anodized), toe links, 59mm (2)
(assembled w/ rod ends & hollow balls) (requires 5mm aluminum
wrench #5477)
3139T
Turnbuckles, aluminum (orange-anodized), toe links, 59mm (2)
(assembled w/ rod ends & hollow balls) (requires 5mm aluminum
wrench #5477)
3139P
Turnbuckles, aluminum (pink-anodized), toe links, 59mm (2)
(assembled w/ rod ends & hollow balls) (requires 5mm aluminum
wrench #5477)
3139X
Turnbuckles, aluminum (red-anodized), toe links, 59mm (2)
(assembled with rod ends & hollow balls) (requires 5mm
aluminum wrench #5477)
3644
Turnbuckles, camber link, 39mm (69mm center to center) (assembled
with rod ends and hollow balls) (1 lef t, 1 right) (f its f ront &
rear on
Slash)
3745
Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled
with rod ends and hollow balls)