TRA64077-3 XO-1 Parts List

Page 2 XO-1®: TQi™ 2.4GHz Radio System, Traxxas Link™ Wireless Module, & TSM® (Model 64077-3) Parts List
REV. 220715 1433
Front Suspension & Steering
1552
Screws, 3x8mm cap-head machine (hex driv e) (6)/washers (6)/
wrench
5114
Ball bearings, blue rubber sealed (5x8x2.5mm) (2)
6445
Bellcrank brace/ draglink
6423
Bulkhead tie bars, f ront & rear, aluminum (blue-anodized)
6430
Bulkhead, f ront/ tie bar bushings (2)
3643X
Camber links, front (TUBES blue-anodized, 7075-T6 aluminum,
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
wrench (1) (#2579 3x15 BCS (4) required for installation)
3643G
Camber links, front (TUBES green-anodized, 7075-T6 aluminum,
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
wrench (1) (#2579 3x15 BCS (4) required for installation)
3643R
Camber links, front (TUBES red-anodized, 7075-T6 aluminum,
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
wrench (1) (#2579 3x15 BCS (4) required for installation)
6832X
Caster blocks (c-hubs), 6061-T6 aluminum (blue-anodized), lef t &
right
6832G
Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left
& right
6832A
Caster blocks (c-hubs), 6061-T6 aluminum (orange-anodized),
left & right
6832R
Caster blocks (c-hubs), 6061-T6 aluminum (red-anodized), left &
right
6832
Caster blocks (c-hubs), left & right
6881
Housings, dif f erential, f ront
2553
Screws, 3x15mm countersunk machine (6) (hex driv e)
3932
Screws, 3x6mm f lat-head machine (hex driv e) (6)
5345R
Serv o horns, steering, long (2), short (2)/ linkage, steering (3x20mm
turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4)
6440
Shock tower, f ront, 7075-T6 aluminum (blue-anodized)
6446
Steering bellcrank arm (steel) (1) (requires #6845X f or complete
bellcrank assembly )
6845X
Steering bellcranks/ serv o sav er/ serv o saver spring/ serv o spring
retainer/serv o horn, steering
6439
Steering blocks, 6061-T6 aluminum, lef t & right (blue-anodized)
6454
Stub axle, f ront, 6mm (steel-splined constant-v elocity driveshaft) (2)
3655P
Suspension arms, blue, front/rear (left & right), heavy duty (2)
3655R
Suspension arms, f ront/rear (lef t & right), heav y duty (2)
3655G
Suspension arms, green, front/rear (left & right), heavy duty (2)
3655T
Suspension arms, orange, front/rear (left & right), heavy duty (2)
3655L
Suspension arms, red, front/rear (left & right), heavy duty (2)
6834
Suspension pin set, complete (f ront and rear)
6441
Suspension pins, f ont & rear (4)/ tie bar bushings
6498
Sway bar kit, XO-1® (front and rear) (includes front and rear
sway bars and adjustable linkages)
6742X
Toe links (TUBES blue-anodized, 7075-T6 aluminum, stronger
than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)
6742G
Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger
than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)
6742R
Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger
than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)
3643
Turnbuckles, camber link, 49mm (82mm center to center) (assembled
with rod ends and hollow balls) (1 lef t, 1 right)
5539
Turnbuckles, camber links, 58mm (assembled with rod ends and
hollow balls) (2)
Hardware
1926
Antenna caps, v iny l (2)/ antenna spool
1726
Antenna, tube (1)/ v iny l antenna cap (1)/ wire retainer (1)
1552
Screws, 3x8mm cap-head machine (hex driv e) (6)/washers (6)/
wrench
3934
Body clips, heav y duty (12)
5476X
Hex wrenches; 1.5mm, 2mm, 2.5mm, 3mm, 2.5mm ball
5475
Mult i-tool (plastic)
2745
Nuts, 3mm ny lon locking (12)
5144
Screw pin, 2.5x18mm (6)
5189
Screw pins, 4x13mm (with threadlock) (4)
3236
Screws, 2.5x12mm cap-head machine (6)
2524
Screws, 2.5x8mm countersunk machine (hex driv e) (6)
2577X
Screws, 3x10 button-head machine (hex driv e) (stainless steel) (6)
2577
Screws, 3x10mm button-head machine (hex driv e) (6)
2551
Screws, 3x10mm countersunk machine (6) (hex driv e)
2578
Screws, 3x12mm button-head machine (hex driv e) (6)
2552
Screws, 3x12mm countersunk machine (6) (hex driv e)
2579
Screws, 3x15mm button-head machine (hex driv e) (6)
5142
Screws, 3x15mm cap-head machine (hex driv e) (with split and f lat
washers) (6)
2553
Screws, 3x15mm countersunk machine (6) (hex driv e)
2583
Screws, 3x18mm button-head machine (hex driv e) (6)
2580
Screws, 3x20mm button-head machine (hex driv e) (6)
2575
Screws, 3x6mm button-head machine (hex driv e) (6)
2554
Screws, 3x6mm cap-head machine (hex driv e) (6)
3932
Screws, 3x6mm f lat-head machine (hex driv e) (6)
3937
Screws, 4x12mm button-head machine (hex driv e) (6)
2542
Screws, 4x12mm countersunk machine (hex driv e) (6)
3938
Screws, 4x14mm button-head machine (hex driv e) (6)
2546
Screws, 4x15mm countersunk machine (hex driv e) (6)
3929
Screws, 4x18mm button-head machine (hex driv e) (6)
2533
Screws, 4x30mm countersunk machine (hex driv e) (6)
3967
Shoulder screws 3x10 (6) (without threadlock)
6834
Suspension pin set, complete (f ront and rear)
5480X
Wheel wrench, splined, 17mm
Manuals
6499
Owner's manual, XO-1®
Motors & Electronics
1726
Antenna, tube (1)/ v iny l antenna cap (1)/ wire retainer (1)
2072A
Gear set (f or 2070, 2075 serv os)
2252
Gear set, metal (for 2250, 2255 servos)
5626
Hold down bracket, electronic speed control
6461
Motor adapter/ GS 3x30mm
6460
Motor mount
5142
Screws, 3x15mm cap-head machine (hex driv e) (with split and f lat
washers) (6)
2546
Screws, 4x15mm countersunk machine (hex driv e) (6)
2254
Servo case, aluminum (blue-anodized) (middle) (for 2250 servo)
2253
Servo case, aluminum (red-anodized) (middle) (for 2255 servo)
2251
Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for
2250, 2255 servos)
2074
Serv o case/gaskets (f or 2056 and 2075 waterproof serv os)
2075R
Servo, digital high-speed, metal gear (ball bearing), waterproof
2075
Serv o, digital high-torque (ball bearing), waterproof
2250
Servo, digital high-torque 330 coreless, metal gear (ball bearing),
waterproof
2255
Servo, digital high-torque 400 brushless, metal gear (ball
bearing), waterproof
2075X
Servo, digital high-torque, metal gear (ball bearing), waterproof
Radio System, Batteries & Chargers
2872X
5000mAh 11.1v 3-Cell 25C LiPo Battery
2842X
5000mAh 7.4v 2-Cell 25C LiPo Battery
2843X
5800mAh 7.4v 2-Cell 25C LiPo Battery
2857X
6400mAh 11.1v 3-Cell 25C LiPo Battery
2869X
7600mAh 7.4v 2-Cell 25C LiPo Battery
2943
Battery charge indicators (green (4), blue (4), gray (4))
6428
Battery cups (2)
6548
Battery door, transmitter (replacement f or #6516, 6517, 6528, 6529,
6530 transmitters)
6427
Battery hold-down retainer (2)
6427X
Battery hold-down retainer, tall (2) (allows for installation of
taller, multi-cell batteries)
6426
Battery hold-downs (2)
6426X
Battery hold-downs, tall (2) (allows for installation of taller, multi-
cell batteries)
2914
Battery, Power Cell AA Alkaline (4)
2991
Battery/charger completer pack (includes #2972 Dual iD®
charger (1), #2869X 7600mAh 7.4V 2-cell 25C LiPo battery (2))
2990
Battery/charger completer pack (includes #2972 Dual iD®
charger (1), #2872X 5000mAh 11.1V 3-cell 25C LiPo battery (2))
2972
Charger, EZ-Peak® Dual, 100W, NiMH/LiPo with iD® Auto Battery
Identification
2973
Charger, EZ-Peak® Live Dual, 200W, NiMH/LiPo with iD® Auto
Battery Identification
2971
Charger, EZ-Peak® Live, 100W, NiMH/LiPo with iD® Auto Battery
Identification
2981
Charger, EZ-Peak® Plus 4s, 8 amp, NiMH/LiPo with iD® Auto
Battery Identification
2970
Charger, EZ-Peak® Plus, 4 amp, NiMH/LiPo with iD® Auto
Battery Identification
6525
Communication link, telemetry expander
2072A
Gear set (f or 2070, 2075 serv os)
2252
Gear set, metal (for 2250, 2255 servos)
2968X
LiPo cell voltage checker/balancer (includes #2938X adapter for
Traxxas® iD® batteries)
2968
LiPo cell voltage checker/balancer (requires #2938X adapter for
Traxxas® iD® batteries)
6556
Mount, telemetry expander (fits XO-1®, E-Revo®*, Summit*, all T-
Maxx®/E
-Maxx® trucks, Revo® 3.3, Slayer Pro 4X4) (*requires
rear chassis brace #5632)
6535
Mount, temperature sensor (electric motors)/ wire tie/ thermal
pad
6533
Receiv er, micro, TQi 2.4GHz with telemetry & TSM (5-channel)