TRA8140 TRX-4 Long Arm Lift Kit - Manual

TRAXXAS
•
3
ITEMS YOU WILL NEED
• Hex driver • 4-way wrench
• Small at blade screwdriver
• Needle nose pliers
• Safety glasses
These items can be purchased from your hobby dealer.
If you have any questions, call the Traxxas Technical
Support Line toll-free at:
1-888-TRAXXAS (1-888-872-9927)*
Technical support is available Monday through
Friday from 8:30am to 9:00pm central time. Technical
assistance is also available at Traxxas.com. You may
also e-mail customer support with your question at
[e-mail].
HARDWARE DESCRIPTIONS
The following chart is provided to help you identify the
many dierent sizes and types of hardware that are
used in the assembly of this lift kit. Note the dierence
between the length measurements of the roundhead
and countersunk screws. A ruler is provided at the
bottom of each page to measure the length of the
screws in millimeters.
Introduction
3x12mm Countersunk Screw 3x12mm Buttonhead Screw
3mm
12mm
3mm
12mm
CCS Countersunk Cap Screw GS Set (Grub) Screw
CS Cap Screw E E-Clip
FCS Flathead Cap Screw BCS Buttonhead Cap Screw
*Toll-free support is available to U.S. residents only.