TRA82024-4 TRX4 Sport Parts List
TRX-4 Sport (Model 82024-4) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically.
For assistance, call 1-888-TRAXXAS, or e-mail Traxxas anytime at support@Traxxas.com REV. 180703 1048
Axle Components
8241 Axle housing, front
8242 Axle housing, rear
8227 Axle mount set (complete) (front & rear) (for suspension links)
8228 Axle shaft, front (left)/ drive pin/ cross pin
8229 Axle shaft, front (right)/ drive pin/ cross pin
8230 Axle shaft, rear (left)
8231 Axle shaft, rear (right)
8233 Cross pin (2)/ drive pin (2) (to rebuild front axle shafts)
8256 Portal drive axle mount, rear (left & right)
8252 Portal drive housing, inner, front (left & right)/ 2.5x4 BCS (6)
8253 Portal drive housing, inner, rear (left or right) (2)
8251 Portal drive housing, outer (front or rear) (2)
8257 Portal drive input gear, front/ drive pin/ cross pin
8259 Portal drive input gear, rear
8258 Portal drive output gear, front or rear
8255 Stub axle (portal drive) (2)
Bearings & Bushings
5119A Ball bearings, black rubber sealed (10x15x4mm) (2)
5120A Ball bearings, black rubber sealed (12x18x4mm) (2)
5102A Ball bearings, black rubber sealed (15x21x4mm) (2)
5104A Ball bearings, black rubber sealed (4x10x4mm) (2)
5115A Ball bearings, black rubber sealed (5x10x4mm) (2)
5116A Ball bearings, black rubber sealed (5x11x4mm) (2)
5114A Ball bearings, black rubber sealed (5x8x2.5mm) (2)
5117A Ball bearings, black rubber sealed (6x12x4mm) (2)
5180A Ball bearings, black rubber sealed (6x13x5mm) (2)
5103A Ball bearings, black rubber sealed (7x14x5mm) (2)
Body & Accessories
1926 Antenna caps, vinyl (2)/ antenna spool
1726 Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
1834 Body clips (12) (standard size)
1834A Body clips, black (12) (standard size)
3934 Body clips, heavy duty (12)
8215 Body mounts & posts, front & rear (complete set)
8115 Body posts, front & rear
4915 Body washers, foam adhesive (10)
8010 Body, Ford Bronco (clear, requires painting)/ decals/ window
masks/ tailgate panel insert/ adhesive foam tape (2)
8010X Body, Ford Bronco, complete (black) (includes front and rear
bumpers, push bar, rear body mount, grill, side mirrors, door
handles, windshield wipers, spare tire mount, red and sunset
decals) (requires #8072 inner fenders)
8011 Body, Land Rover Defender (clear, trimmed, requires painting)/
window masks/ decal sheet
8011A Body, Land Rover Defender, adventure orange (complete with
ExoCage, inner fenders, fuel canisters, and jack)
8011X Body, Land Rover Defender, graphite silver (painted)/ decals
8011R Body, Land Rover Defender, red (painted)/ decals
8211 Body, Tactical Unit (clear, requires painting)/ decals
8211X Body, Tactical Unit, night camo (painted)/ decals
8111 Body, TRX-4 Sport (clear, trimmed, requires painting)/ window
masks/ decal sheet
2514 Decal sheet, racing sponsors
8113 Decal Sheet, TRX-4 Sport
8012 Decals, Land Rover Defender
8016 ExoCage (complete with assembly hardware; #8015 roof basket
sold separately) (fits #8011 body)
8019 Fender brace, inner, front & rear
8017 Fender flares, front & rear (2 each)
8080 Fenders, inner (narrow), front & rear (2 each)/ rock light covers
(8)/ battery plate/ 3x8 flathead screws (4)
8018 Fenders, inner, front & rear (2 each)/ rock light covers (8)
8072 Fenders, inner, front & rear (2 each)/ rock light covers (8)/ battery
plate/ 3x8 flathead screws (4)
8013 Grill, Land Rover Defender/ grill mount (3)/ headlight housing (2)/
lens (2)/ headlight mount (2) (fits #8011 body)
9950 Official Team Traxxas racing decal set (flag logo/ 6-color)
8015 Roof basket (requires #8016 ExoCage) (fits #8011 body)
Bumpers & Skidplates
8234 Bumper D-Rings, grey (front or rear)/ 2.0x12 CS (4)
8234R Bumper D-rings, red (front or rear)/ 2.0x12 CS (4)
8067X Bumper mounts, front & rear/ bumper mount, rear (offset)
8237 Bumper mounts, front & rear/ screw pins (4)
8124 Bumper, front (178mm wide)/ winch/ 2.6x8 BCS (1)
8235 Bumper, front/ winch
8236 Bumper, rear
8125 Bumper, rear (176mm wide)
8238 Skidplate/ lower gear cover
Chassis & Attachments
8215 Body mounts & posts, front & rear (complete set)
8224 Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x8
BCS (5)/ 2.5x8 CS (2)
8058 Chassis conversion kit, TRX-4 (long to short wheelbase)
(includes rear upper & lower suspension links, front & rear inner
fenders, short female half shaft, battery tray, 3x8mm FCS (4))
8057 Chassis conversion kit, TRX-4 (short to long wheelbase)
(includes rear upper & lower suspension links, front & rear
shock towers, long female half shaft)
8220 Chassis rails, 448mm (steel) (left & right)
8218 Floor pans, left & right
8219 Rock sliders, left & right
8225 Seal kit, receiver box (includes o-ring, seals, and silicone
grease)
8240 Servo mount, 2-speed/ servo mount, T-Lock/ wire clips
8239 Servo mount, steering/ chassis crossmember
8216 Shock towers, front & rear (left & right)
8226 Tray, battery
Differential Components
8281 Carrier, differential/ differential slider/ T-Lock fork
8280X Differential cover, front or rear (chrome-plated)
8280 Differential cover, front or rear (grey)
8280R Differential cover, front or rear (red)
8195 Differential, locking, front and rear (assembled) (includes T-Lock
cables and servo)
8282 Gear set, differential (output gears (2), spider gears (4), spider
gear shaft (2))
8295 Output drive, transmission or differential (pin retainer (1)/ drive cup
(1)/ drive ball (1)/ drive pin (1)/ 3x11 screw pin (1)/ cross pin (black)
(1) 3x6 BCS with threadlock (1))
8279 Ring gear, differential/ pinion gear, differential
8279R Ring gear, differential/ pinion gear, differential (machined)
8287 Ring gear, differential/ pinion gear, differential (overdrive,
machined)
8288 Ring gear, differential/ pinion gear, differential (underdrive,
machined)
8297 Spool/ differential housing plug/ e-clip
Driveline Components
8250 Half shafts, center (internal splined, front (2) & internal splined, rear
(2)/ external splined (2)/ pin retainer (4)) (plastic parts only)
8269 Wheel hubs, 12mm hex (2)/ stub axle pins (2) (steel) (fits TRX-4)
Hardware
1552 Backplate screws (3x8mm cap-head machine) (6)/washers (6)/
wrench
1834 Body clips (12) (standard size)
1834A Body clips, black (12) (standard size)
3934 Body clips, heavy duty (12)
8298 Hardware kit, stainless steel, TRX-4 (contains all stainless steel
hardware used on TRX-4)
5476X Hex wrenches; 1.5mm, 2mm, 2.5mm, 3mm, 2.5mm ball
3647 Nuts, 4mm flanged nylon locking (steel, serrated) (8)
8347 Nuts, 4mm flanged nylon locking, serrated (black) (10)
1747R Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)
1747G Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
1747P Nuts, aluminum, flanged, serrated (4mm) (pink-anodized) (4)
1985 PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
3229 Screws, 2.5x10mm cap-head machine (hex drive) (6)
2523 Screws, 2.5x10mm countersunk machine (hex drive) (6)
3236 Screws, 2.5x12mm cap-head machine (6)
2618 Screws, 2.5x16mm cap-head machine (6)
3215 Screws, 2.5x6mm cap-head machine (hex drive) (6)
2617 Screws, 2.5x8mm button-head machine (hex drive) (6)
3965 Screws, 2.5x8mm cap-head machine (6)
2524 Screws, 2.5x8mm countersunk machine (hex drive) (6)
2564 Screws, 2x8mm cap-head machine (hex drive) (6)
2577 Screws, 3x10mm button-head machine (hex drive) (6)
4859 Screws, 3x10mm flat-head machine (hex drive) (4)
2578 Screws, 3x12mm button-head machine (hex drive) (6)