TRX-4 79 K5 Blazer Parts List

ManualsBrandsTraxxas ManualsHobby1979 Chevrolet Blazer Trail Crawler (Orange)

Page 4 TRX-4 1979 Chevrolet Blazer: TQi Traxxas Link Enabled 2.4GHz Radio (Model 82076-4) Parts List

REV. 190305 0810

2975 Charger, DC, 4 amp (6 - 7 cell, 7.2 - 8.4 volt, NiMH)

2972 Charger, EZ-Peak Dual, 100W, NiMH/LiPo with iD Auto Battery

Identification

2973 Charger, EZ-Peak Live Dual, 200W, NiMH/LiPo with iD Auto

Battery Identification

2971 Charger, EZ-Peak Live, 100W, NiMH/LiPo with iD Auto Battery

Identification

2970 Charger, EZ-Peak Plus, 4 amp, NiMH/LiPo with iD Auto Battery

Identification

6525 Communication link, telemetry expander

6512 Cover plate, Traxxas Link Wireless Module

2978 Fuse, charger, 5A (2) (for #2974, 2975, 2977)

2064 Gear set (for 2065 waterproof sub-micro servo)

2064X Gear set, metal (for 2065X waterproof sub-micro servo)

2072X Gear set, metal (for 2070, 2075 servos)

2252 Gear set, metal (for 2250, 2255 servos)

2072R Gear set, metal, high speed (for 2070, 2075 servos)

2968X LiPo cell voltage checker/balancer (includes #2938X adapter for

Traxxas iD batteries)

2968 LiPo cell voltage checker/balancer (requires #2938X adapter for

Traxxas iD batteries)

6561 Mount, telemetry expander (fits TRX-4)

6535 Mount, temperature sensor (electric motors)/ wire tie/ thermal

pad

6533 Receiver, micro, TQi 2.4GHz with telemetry & TSM (5-channel)

6552 Seal kit, expander box (includes o-ring, seals, and silicone

grease)

6526 Sensor, auto-detectable, temperature

6527 Sensor, auto-detectable, voltage

6521 Sensor, temperature and voltage (long)

2254 Servo case, aluminum (blue-anodized) (middle) (for 2250 servo)

2253 Servo case, aluminum (red-anodized) (middle) (for 2255 servo)

2251 Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for

2250, 2255 servos)

2063 Servo case/gaskets (for 2065 waterproof sub-micro servo)

2063X Servo case/gaskets (for 2065X metal gear, waterproof, sub-micro

servo)

2075R Servo, digital high-speed, metal gear (ball bearing), waterproof

2250 Servo, digital high-torque 330 coreless, metal gear (ball bearing),

waterproof (#2262 external BEC and #8247X metal servo horn

recommended for optimal performance)

2255 Servo, digital high-torque 400 brushless, metal gear (ball

bearing), waterproof (#2262 external BEC and #8247 steel servo

horn recommended for optimal performance)

2075X Servo, digital high-torque, metal gear (ball bearing), waterproof

2065 Servo, sub-micro, waterproof

2065X Servo, sub-micro, waterproof, metal gear

6553X Telemetry expander 2.0 and GPS module 2.0, TQi radio system

6550X Telemetry expander 2.0, TQi radio system (compatible only with

#6551X GPS module)

6550 Telemetry expander, TQi radio system

6551X Telemetry GPS module 2.0, TQi radio system (compatible only

with #6550X telemetry expander)

6530 Transmitter, TQi Traxxas Link enabled, 2.4GHz high output, 4-

channel (transmitter only)

6511 Traxxas Link Wireless Module

2261 Y-harness, BEC

Ready-To-Race Model

82096-4 TRX-4 Scale and Trail Crawler with Mercedes G500 Body: 4WD

Electric Trail Truck with TQi Traxxas Link Enabled 2.4GHz Radio

System

Scale Details

8120X Expedition rack, complete (includes traction boards, shovel, axe,

jack, fire extinguisher, fuel cans, & mounting hardware)

8022T Fuel canisters (black) (2)/ 3x8 FCS (1)

8022R Fuel canisters (blue) (2)/ 3x8 FCS (1)

8022 Fuel canisters (red) (2)/ 3x8 FCS (1)

8022X Fuel canisters (white) (2)/ 3x8 FCS (1)

8022A Fuel canisters (yellow) (2)/ 3x8 FCS (1)

8023T Jack (black) (1)/ 2x8 BCS (1)

8023 Jack (red) (1)/ 2x8 BCS (1)

8122 Shovel/ axe/ accessory mount/ mounting hardware

8121 Traction boards/ mounting hardware

Shocks (GTS)

8266 Body, GTS shock (aluminum, silver-anodized) (1)

8266X Body, GTS shock (hard-anodized, PTFE-coated aluminum) (1)

8266A Body, GTS shock, aluminum (blue-anodized) (1)

8266G Body, GTS shock, aluminum (green-anodized) (1)

8266R Body, GTS shock, aluminum (red-anodized) (1)

8264 Caps & spring retainers, GTS shocks (upper cap (2)/ hollow balls (4)/

bottom cap (2)/ upper retainer (2)/ lower retainer (2))

8274 Hollow ball set, complete, TRX-4 (aluminum, PTFE-coated)

5475 Multi-tool (plastic)

8261 Piston, damper (red) (4)/ e-clips (8)

8262 Rebuild kit, GTS shocks (x-rings, o-rings, pistons, bushings, e-clips,

and rod ends)

8263 Shock shaft, 3x47mm (GTS) (2)

8263T Shock shaft, 3x47mm (GTS) (titanium nitride-coated) (2)

8260X Shocks, GTS hard-anodized, PTFE-coated aluminum bodies with

TiN shafts (assembled with spring retainers) (2)

8260A Shocks, GTS, aluminum (blue-anodized) (assembled with spring

retainers) (2)

8260G Shocks, GTS, aluminum (green-anodized) (assembled with

spring retainers) (2)

8260R Shocks, GTS, aluminum (red-anodized) (assembled with spring

retainers) (2)

8260 Shocks, GTS, silver aluminum (assembled with spring retainers) (2)

1666 Silicone shock oil (30 wt)

Slipper Clutch Components

8292 Input shaft/ output shaft (transmission)

8286 Output shafts (transfer case), front & rear

8254 Rebuild kit, slipper clutch (steel disc (2)/ friction insert (2)/ 4.0mm NL

(1)/ spring washers (4), metal washer (1))

8249 Slipper eliminator plate

Springs

8042 Springs, shock (natural finish) (GTS) (0.22 rate, yellow stripe) (2)

8043 Springs, shock (natural finish) (GTS) (0.30 rate, white stripe) (2)

8044 Springs, shock (natural finish) (GTS) (0.39 rate, orange stripe) (2)

8041 Springs, shock (natural finish) (GTS) (0.45 rate) (2)

8040 Springs, shock (natural finish) (GTS) (0.54 rate, green stripe) (2)

8045 Springs, shock (natural finish) (GTS) (0.61 rate, blue stripe) (2)

Spur Gears & Pinion Gears

6746 Gear, 10-T pinion (32-p) (steel)/ set screw

6747 Gear, 11-T pinion (32-p) (steel)/ set screw

3942X Gear, 12-T pinion (32-p), heavy duty (machined, hardened steel)/

set screw

3943X Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel)/

set screw

3944X Gear, 14-T pinion (32-p), heavy duty (machined, hardened steel)/

set screw

3945X Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)/

set screw

3946X Gear, 16-T pinion (32-p), heavy duty (machined, hardened steel)/

set screw

3947 Gear, 17-T pinion (32-p) (mach. steel)/ set screw

3947X Gear, 17-T pinion (32-p), heavy duty (machined, hardened steel)/

set screw

3948X Gear, 18-T pinion (32-p), heavy duty (machined, hardened steel)/

set screw

3949X Gear, 19-T pinion (32-p), heavy duty (machined, hardened steel)/

set screw

3950X Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel)/

set screw

3951X Gear, 21-T pinion (32-p), heavy duty (machined, hardened steel)/

set screw

3952X Gear, 22-T pinion (32-p), heavy duty (machined, hardened steel)/

set screw

6745 Gear, 9-T pinion (32-p) (steel)/ set screw

8052 Spur gear, 39-tooth (TRX-4)

8053 Spur gear, 45-tooth (TRX-4)

Steering Components

8232 Caster blocks (portal drive), left & right/ kingpin bushings (4)

8232X Caster blocks, 6061-T6 aluminum (blue-anodized), left and right

8232A Caster blocks, 6061-T6 aluminum (charcoal gray-anodized), left

and right

8232G Caster blocks, 6061-T6 aluminum (green-anodized), left and right

8232R Caster blocks, 6061-T6 aluminum (red-anodized), left and right

2072X Gear set, metal (for 2070, 2075 servos)

2072R Gear set, metal, high speed (for 2070, 2075 servos)

8274 Hollow ball set, complete, TRX-4 (aluminum, PTFE-coated)

5355 Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer

adjustment shims; 3.5mm (2), 1.17mm (2)

8275 Rod end set, complete (standard (10), angled 10-degrees (8), offset

(4))

8276 Rod ends (10)

8277 Rod ends, angled 10-degrees (8)

2742 Rod ends, long (6)/ hollow ball connectors (6)

8278 Rod ends, offset (4)

8247 Servo horn, steering