TRA85086-4 Unlimited Desert Racer Manual

DESERT RACER
•
23
HIGH-VOLTAGE POWER AMPLIFIER AND LED LIGHTS
Your Unlimited Desert Racer comes equipped with a curved roof
light bar, dual straight LED bumper-mounted light bars, and a
multifunction brake light/class light bar. A high-voltage 8-channel
power amplifier is also included to provide regulated output and
stable lighting performance. The amplifier and the LED lights will
turn on when the ESC is turned on.
Controlling the LED Lights
Default Setting: Low Beam Mode
*To race the truck with tail lights, connect the in-line connector on
the rear LED light bar harness.
High-Voltage Power Amplifier Mode Selection
Use the Mode Select button on the high-voltage power amplifier to
toggle through the different lighting modes (from Low Beam Mode
to High Beam Mode to Daytime Mode).
Change the high-voltage power
amplifier settings and gain access
to additional functions using the
Traxxas Link App (available in the
Apple App Store
SM
or on Google
Play™). The TQi transmitter with
the Traxxas Link Wireless Module
(part #6511, sold separately) are required.
This device complies with FCC Part 15 & IC RSS-210 rules subject to the following conditions:
(1) This device may not cause harmful interference, and (2) This device must accept all interference
received, including interference that may cause undesired operation.
App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.
Connector Channel Default Connection Default Setting
A 1 Front Grille Low Beam Headlights On
2 Front Grille High Beam Headlights O
B 3 Low Beam Windshield Lights On
4 High Beam Windshield Lights O
C 5 Tail Lights O*
6 Brake Lights On when braking
D 7 Class Lights On
8 Not used N/A
Connector Channel Low Beam Mode High Beam Mode Daytime Mode
A 1 On O O
2 O On O
B 3 On O O
4 O On O
C 5 On On O
6 On when braking On when braking On when braking
D 7 On On On
8 N/A N/A N/A