TRA88096-4BLK TRX-6 Parts List

Page 3 TRX-6™ Mercedes-Benz® G 63® AMG 6X6: TQi Traxxas Link Enabled 2.4GHz Radio (Model 88096-4) Parts List
REV. 190905 1537
2992 Battery/charger completer pack (includes #2970 iD® charger (1),
#2843X 5800mAh 7.4V 2-cell 25C LiPo battery (1))
2994 Battery/charger completer pack (includes #2970 iD® charger (1),
#2849X 4000mAh 11.1v 3-Cell 25C LiPo Battery (1))
2995 Battery/charger completer pack (includes #2970 iD® charger (1),
#2869X 7600mAh 7.4V 2-cell 25C LiPo battery (1))
2991 Battery/charger completer pack (includes #2972 Dual iD®
charger (1), #2869X 7600mAh 7.4V 2-cell 25C LiPo battery (2))
2262 BEC, complete (includes receiver box cover and seals)
2975 Charger, DC, 4 amp (6 - 7 cell, 7.2 - 8.4 volt, NiMH)
2972 Charger, EZ-Peak® Dual, 100W, NiMH/LiPo with iD® Auto Battery
Identification
2973 Charger, EZ-Peak® Live Dual, 200W, NiMH/LiPo with iD® Auto
Battery Identification
2971 Charger, EZ-Peak® Live, 100W, NiMH/LiPo with iD® Auto Battery
Identification
2970 Charger, EZ-Peak® Plus, 4 amp, NiMH/LiPo with iD® Auto
Battery Identification
6525 Communication link, telemetry expander
6512 Cover plate, Traxxas Link™ Wireless Module
2978 Fuse, charger, 5A (2) (for #2974, 2975, 2977)
2064 Gear set (for 2065 waterproof sub-micro servo)
2064X Gear set, metal (for 2065X waterproof sub-micro servo)
2072X Gear set, metal (for 2070, 2075 servos)
2252 Gear set, metal (for 2250, 2255 servos)
2072R Gear set, metal, high speed (for 2070, 2075 servos)
2968X LiPo cell voltage checker/balancer (includes #2938X adapter for
Traxxas® iD® batteries)
2968 LiPo cell voltage checker/balancer (requires #2938X adapter for
Traxxas® iD® batteries)
6561 Mount, telemetry expander
6535 Mount, temperature sensor (electric motors)/ wire tie/ thermal
pad
6533 Receiver, micro, TQi 2.4GHz with telemetry & TSM (5-channel)
6552 Seal kit, expander box (includes o-ring, seals, and silicone
grease)
6526 Sensor, auto-detectable, temperature
6527 Sensor, auto-detectable, voltage
6521 Sensor, temperature and voltage (long)
2254 Servo case, aluminum (blue-anodized) (middle) (for 2250 servo)
2253 Servo case, aluminum (red-anodized) (middle) (for 2255 servo)
2251 Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for
2250, 2255 servos)
2063 Servo case/gaskets (for 2065 waterproof sub-micro servo)
2063X Servo case/gaskets (for 2065X metal gear, waterproof, sub-micro
servo)
2075R Servo, digital high-speed, metal gear (ball bearing), waterproof
2250 Servo, digital high-torque 330 coreless, metal gear (ball bearing),
waterproof (#2262 external BEC and #8247X metal servo horn
recommended for optimal performance)
2255 Servo, digital high-torque 400 brushless, metal gear (ball
bearing), waterproof (#2262 external BEC and #8247 steel servo
horn recommended for optimal performance)
2075X Servo, digital high-torque, metal gear (ball bearing), waterproof
2065 Servo, sub-micro, waterproof
2065X Servo, sub-micro, waterproof, metal gear
6553X Telemetry expander 2.0 and GPS module 2.0, TQi radio system
6550X Telemetry expander 2.0, TQi radio system (compatible only with
#6551X GPS module)
6550 Telemetry expander, TQi radio system
6551X Telemetry GPS module 2.0, TQi radio system (compatible only
with #6550X telemetry expander)
6530 Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 4-
channel (transmitter only)
6511 Traxxas Link™ Wireless Module
2261 Y-harness, BEC
Ready-To-Race Model
88096-4 TRX-6™ Scale and Trail™ Crawler with Mercedes-Benz® G 63®
AMG Body: 6X6 Electric Trail Truck with TQi Traxxas Link™ Enabled
2.4GHz Radio System
Shocks (GTS)
8266 Body, GTS shock (aluminum, silver-anodized) (1)
8266X Body, GTS shock (hard-anodized, PTFE-coated aluminum) (1)
8266A Body, GTS shock, aluminum (blue-anodized) (1)
8266G Body, GTS shock, aluminum (green-anodized) (1)
8266R Body, GTS shock, aluminum (red-anodized) (1)
8264 Caps & spring retainers, GTS shocks (upper cap (2)/ hollow balls (4)/
bottom cap (2)/ upper retainer (2)/ lower retainer (2))
8274 Hollow ball set, complete, TRX-4® (aluminum, PTFE-coated)
5475 Multi-tool (plastic)
8261 Piston, damper (red) (4)/ e-clips (8)
8262 Rebuild kit, GTS shocks (x-rings, o-rings, pistons, bushings, e-clips,
and rod ends)
8263 Shock shaft, 3x47mm (GTS) (2)
8263T Shock shaft, 3x47mm (GTS) (titanium nitride-coated) (2)
8260X Shocks, GTS hard-anodized, PTFE-coated aluminum bodies with
TiN shafts (assembled with spring retainers) (2)
8260A Shocks, GTS, aluminum (blue-anodized) (assembled with spring
retainers) (2)
8260G Shocks, GTS, aluminum (green-anodized) (assembled with
spring retainers) (2)
8260R Shocks, GTS, aluminum (red-anodized) (assembled with spring
retainers) (2)
8260 Shocks, GTS, silver aluminum (assembled with spring retainers) (2)
1666 Silicone shock oil (30 wt)
Slipper Clutch Components
8292 Input shaft/ output shaft (transmission)
8286 Output shafts (transfer case), front & rear
8254 Rebuild kit, slipper clutch (steel disc (2)/ friction insert (2)/ 4.0mm NL
(1)/ spring washers (4), metal washer (1))
8249 Slipper eliminator plate
Springs
8042 Springs, shock (natural finish) (GTS) (0.22 rate, yellow stripe) (2)
8043 Springs, shock (natural finish) (GTS) (0.30 rate, white stripe) (2)
8044 Springs, shock (natural finish) (GTS) (0.39 rate, orange stripe) (2)
8041 Springs, shock (natural finish) (GTS) (0.45 rate) (2)
8040 Springs, shock (natural finish) (GTS) (0.54 rate, green stripe) (2)
8045 Springs, shock (natural finish) (GTS) (0.61 rate, blue stripe) (2)
Spur Gears & Pinion Gears
6746 Gear, 10-T pinion (32-p) (steel)/ set screw
6747 Gear, 11-T pinion (32-p) (steel)/ set screw
3942X Gear, 12-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3943X Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3944X Gear, 14-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3945X Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3946X Gear, 16-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3947X Gear, 17-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3948X Gear, 18-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3949X Gear, 19-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3950X Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3951X Gear, 21-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
3952X Gear, 22-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
6745 Gear, 9-T pinion (32-p) (steel)/ set screw
8052 Spur gear, 39-tooth (32-pitch)
8053 Spur gear, 45-tooth (32-pitch)
Steering Components
8232 Caster blocks (portal drive), left & right/ kingpin bushings (4)
8232X Caster blocks, 6061-T6 aluminum (blue-anodized), left and right
8232A Caster blocks, 6061-T6 aluminum (charcoal gray-anodized), left
and right
8232G Caster blocks, 6061-T6 aluminum (green-anodized), left and right
8232R Caster blocks, 6061-T6 aluminum (red-anodized), left and right
2072X Gear set, metal (for 2070, 2075 servos)
2072R Gear set, metal, high speed (for 2070, 2075 servos)
8274 Hollow ball set, complete, TRX-4® (aluminum, PTFE-coated)
5355 Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer
adjustment shims; 3.5mm (2), 1.17mm (2)
8275 Rod end set, complete (standard (10), angled 10-degrees (8), offset
(4))
8276 Rod ends (10)
8277 Rod ends, angled 10-degrees (8)
2742 Rod ends, long (6)/ hollow ball connectors (6)
8278 Rod ends, offset (4)
8247 Servo horn, steering
8247X Servo horn, steering, metal/ 3x14 BCS (1)
2075R Servo, digital high-speed, metal gear (ball bearing), waterproof
2075X Servo, digital high-torque, metal gear (ball bearing), waterproof
5529 Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls,
captured (4)
8246 Steering link, 5x60mm (1)/ draglink, 5x117mm (1) (steel)