TRA94076-4 Drag Slash Parts List

Drag Slash (Model 94076-4) Parts List
Parts shown in bold are optional accessories. Part categories and indiv idual part listings are arranged alphabetically.
For assistance, call 1-888-TRAXXAS, or e-mail Tr axxas anytime at support@Tr axxas.com REV. 210526 0935
Bearings & Bushings
4607
Ball bearings (5x11x4mm) (8)
2728
Ball bearings (5x8x2.5mm) (2)
5116
Ball bearings, blue rubber sealed (5x11x4mm) (2)
5114
Ball bearings, blue rubber sealed (5x8x2.5mm) (2)
2545
Bellcrank bushings (plastic) (5x8x2.5mm) (4)
1985
PTF E-coated washers, 5x8x0.5mm (20) (use with ball bearings)
Body & Accessories
1926
Antenna caps, vinyl (2)/ antenna spool
1726A
Antenna, tube, black (1)/ v iny l antenna cap (1)/ wire retainer (1)
9415
Body accessories, Chev rolet C10, black (includes grille (upper &
lower), headlight housings (lef t & right), bumpers (f ront & rear),
mounting retainers and hardware)
9415X
Body accessories, Chevrolet C10, black chrome (includes grille
(upper & lower), headlight housings (left & right), bumpers (front
& rear), mounting retainers and hardware)
9415R
Body accessories, Chevrolet C10, chrome (includes grille (upper
& lower), headlight housings (left & right), bumpers (front &
rear), mounting retainers and hardware)
9415A
Body accessories, Chevrolet C10, satin black chrome (includes
grille (upper & lower), headlight housings (left & right), bumpers
(front & rear), mounting retainers and hardware)
3935
Body clip (mounting clip), angled, 90-degrees (10)
3935A
Body clip (mounting clip), angled, 90-degrees (black) (10)
3934
Body clips, heav y duty (12)
3619
Body mounts, f ront & rear/ body mount posts, f ront & rear
(adjustable)/ 2.5x18mm screw pins (4)
1815
Body washers (8)
6716
Body washers, foam, 2mm (4)/ 3mm (4)/ 4mm (4)
9411A
Body , Chev rolet C10 (black) (includes wing & decals) (requires #9415
series body accessories to complete body )
9411X
Body , Chev rolet C10 (blue) (includes wing & decals) (requires #9415
series body accessories to complete body )
9411
Body, Chevrolet C10 (clear, requires painting)/ window masks
9411G
Body , Chev rolet C10 (green) (includes wing & decals) (requires
#9415 series body accessories to complete body )
9411P
Body , Chev rolet C10 (purple) (includes wing & decals) (requires
#9415 series body accessories to complete body )
9411R
Body , Chev rolet C10 (red) (includes wing & decals) (requires #9415
series body accessories to complete body )
9411T
Body , Chev rolet C10 (white) (includes wing & decals) (requires #9415
series body accessories to complete body )
9413
Decal sheet, Chev rolet C10
9413X
Decal sheet, flames
2514
Decal sheet, racing sponsors
9413R
Decal sheet, scallops
9950
Official Team Traxxas® racing decal set (flag logo/ 6-color)
9414
Wing, Chev rolet C10/ support/ side plates (lef t & right)/ 3x10 BCS (4)
Chassis & Attachments
5526
Antenna crimp nut, aluminum (blue-anodized)/ antenna nut tools
5526R
Antenna crimp nut, aluminum (red-anodized)/ antenna nut tools
9463
Axle, wheelie bar, charcoal gray (aluminum)
9419
Body bumper, f oam
3619
Body mounts, f ront & rear/ body mount posts, f ront & rear
(adjustable)/ 2.5x18mm screw pins (4)
5624
Box, receiv er (sealed)/ f oam pad/ silicone grease/ 3x8mm BCS (2)/
2.5x8mm CS (2)/ 3x6mm BCS (2)
9420
Bumper, chassis, f ront (upper & lower)
5836X
Bumper, rear/ bumper brace, rear (black)/ wheelie bar mount
9466
Center support, wheelie bar (double spacer (2), single spacer (2))/
rear axle (plastic) (1)
5830
Chassis conversion kit, low CG (Slash)
5832
Chassis, low CG (black)
5832A
Chassis, low CG (blue)
5832G
Chassis, low CG (gray )
5827
Hold down, battery / hold down retainer/ battery post/ f oam spacer/
angled body clip
5827X
Hold down, battery/ hold down retainer/ battery post/ foam
spacer/ angled body clip (allows for installation of taller, multi-
cell batteries)
5831
Lower chassis, low CG (black)
5831A
Lower chassis, low CG (blue)
5831G
Lower chassis, low CG (gray)
5823
Nerf bars, chassis (black)
5833
Nerf bars, low CG (black)
5833A
Nerf bars, low CG (blue)
5833G
Nerf bars, low CG (gray)
5625
Seal kit, receiv er box (includes o-ring, seals, and silicone grease)
9418
Shock tower, rear
9465
Side plates, wheelie bar (plastic) (2)
9462X
Side plates, wheelie bar, blue (aluminum) (2)
9462
Side plates, wheelie bar, charcoal gray (aluminum) (2)
9462G
Side plates, wheelie bar, green (aluminum) (2)
9462A
Side plates, wheelie bar, orange (aluminum) (2)
9462P
Side plates, wheelie bar, pink (aluminum) (2)
9462R
Side plates, wheelie bar, red (aluminum) (2)
9464
Wheelie bar mount (heavy duty)
9460
Wheelie bar, black (assembled)/ wheelie bar mount
9460X
Wheelie bar, black chrome (assembled)/ wheelie bar mount
9461
Wheels, wheelie bar, black (26mm (2), 18mm (2))
Differential Components
9480
Differential assembly (complete) (assembled with 500K oil)
9482
Dif f erential gasket/ x-rings (2)
9481
Dif f erential with steel ring gear/ side cov er plate/ gasket/ x-rings (2)/
2.5x10mm BCS (4)
6783
Gear set, center dif f erential (output gears (2)/ spider gears (4)/ spider
gear shaf t (2))
5169
Screws, 2.6x8mm countersunk machine (6)
1647
Silicone grease
Driveline Components
5116
Ball bearings, blue rubber sealed (5x11x4mm) (2)
9450
Driv eshaf t assembly (1), lef t or right (f ully assembled, ready to install)/
screw pin (1)
3752
Stub axle carriers (2) (requires 5x11x4mm bearings)
3652A
Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6
aluminum (blue-anodized)/ 5x11mm ball bearings (4)
3652G
Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6
aluminum (green-anodized)/ 5x11mm ball bearings (4)
3652P
Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6
aluminum (pink-anodized)/ 5x11mm ball bearings (4)
3652X
Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6
aluminum (red-anodized)/ 5x11mm ball bearings (4)
2754
Stub axle pins (4)
6853X
Stub axles, rear, heav y duty (2)/pins (2)
Front Suspension & Steering
3637
Axles (f ront) (2)
2728
Ball bearings (5x8x2.5mm) (2)
5116
Ball bearings, blue rubber sealed (5x11x4mm) (2)
2530
Bulkhead (f ront) (black)
2530A
Bulkhead (front) (gray)
3643X
Camber links, front (TUBES blue-anodized, 7075-T6 aluminum,
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
wrench (1) (#2579 3x15 BCS (4) required for installation)
3643G
Camber links, front (TUBES green-anodized, 7075-T6 aluminum,
stro
nger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
wrench (1) (#2579 3x15 BCS (4) required for installation)
3643R
Camber links, front (TUBES red-anodized, 7075-T6 aluminum,
stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum
wrench (1) (#2579 3x15 BCS (4) required for installation)
3632
Caster blocks (l&r) (30-degree)
3632A
Caster blocks, 30-degree, blue-anodized 6061-T6 aluminum (left
& right)/ suspension screw pin (2)
3632G
Caster blocks, 30-degree, green-anodized 6061-T6 aluminum (left
& right)/ suspension screw pin (2)
3632T
Caster blocks, 30-degree, orange-anodized 6061-T6 aluminum
(left & right)/ suspension screw pin (2)
3632P
Caster blocks, 30-degree, pink-anodized 6061-T6 aluminum (left
& right)/ suspension screw pin (2)
3632X
Caster blocks, 30-degree, red-anodized 6061-T6 aluminum (left &
right)/ suspension screw pin (2)
9450
Driv eshaf t assembly (1), lef t or right (f ully assembled, ready to install)/
screw pin (1)
6846
Linkage, steering (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls
(2)
5347
Rod ends, Rev o® (large) with hollow balls (12)
3646
Screws, 3x15mm flat-head machine (hex driv e) (6)
3744
Servo saver w/adapters
3639
Shock tower (f ront)
3743A
Steering bellcranks, drag link (blue-anodized T6 aluminum)/
5x8mm ball bearings (4) hardware (assembled) (requires #3744
servo saver w/adapters)