User manual
Jato® (Model 55077-3) Parts List
Parts shown in bold are opt ional accessories. Part categories and indiv idual part list ings are arranged alphabetically.
For assistance, call 1-888-TRAXXAS, or e-mail Tr axxas anytime at support@Traxxas.com REV. 211202 1202
Air Filters
5265
Air f ilter housing/ f oam insert/ Jato® air f ilter base (long, straight)/
cable tie (1-each) (TRX® 2.5, 2.5R, 3.3)
5261
Air f ilter inserts, f oam (3) (pre-oiled) (TRX® 2.5, 2.5R, 3.3)
5263
Oil, air f ilter
Bearings & Bushings
4609
Ball bearings (5x10x4mm) (2) (metal shielded, f or clutch bell)
4611
Ball bearings (5x11x4mm) (2) (metal shielded, f or clutch bell)
5119
Ball bearings, blue rubber sealed (10x15x4mm) (2)
5124
Ball bearings, blue rubber sealed (4x7x2.5mm) (2)
5116
Ball bearings, blue rubber sealed (5x11x4mm) (2)
5114
Ball bearings, blue rubber sealed (5x8x2.5mm) (2)
5123
Bellcrank bushings (plastic) (4x7x2.5mm) (4)
2545
Bushings (plastic) (5x8x2.5mm) (4)
Body & Accessories
1926
Antenna caps, vinyl (2)/ antenna spool
5526
Antenna crimp nut, aluminum (blue-anodized)/ antenna nut tools
5526R
Antenna crimp nut, aluminum (red-anodized)/ antenna nut tools
1726
Antenna, tube (1)/ v iny l antenna cap (1)/ wire retainer (1)
3935
Body clip (mounting clip), angled, 90-degrees (10)
3935A
Body clip (mounting clip), angled, 90-degrees (black) (10)
1834
Body clips (12) (standard size)
5514
Body mount, f ront
5511
Body, Jato® (clear, requires painting)/window, lights decal
sheet/ wing and aluminum hardware
5511R
Body, Jato® 3.3, ProGraphix® (replacement for the painted
body) Graphics are painted, requires paint & final color
application.
5511T
Body, Jato®, orange (painted, decals applied)
5511A
Body, Jato®, red (painted, decals applied)
5513X
Decal sheet, Jato® 3.3
2514
Decal sheet, racing sponsors
9950
Official Team Traxxas® racing decal set (flag logo/ 6-color)
5512
Wing mounting hardware, (4x8mmCCS (aluminum)(3)/ 4x7mm
f langed NL (3))
Brake Components
5588
Brake cam
5567
Brake cam lev er/ linkage rod/ bellcrank/ 4mm ball screw (1)/ 4mm ball
cup (1)/ 3.0NL (1)/ 3X10 SS (1)
5564
Brake disc (semi-metallic material)
5565
Brake pads (2)/ brake disc hub/ 3X15 CS (partially threaded) (2)/2mm
pin (1)/ 4mm e-clip (1)
5566
Input shaf t (slipper shaf t)/ slipper shaf t spacer
5568
Linkage set, throttle & brake (Jato®) (includes serv o horn, rod guides,
brake spring, brake adjustment dial, rods (wires), throttle return
spring, hardware)
Bumpers & Skidplates
5515X
Battery Box, bumper (rear) (includes battery case with bosses f or
wheelie bar, cov er, and f oam pad)
5535G
Bumper (front), Exo-Carbon finish (Jato®)
5535
Bumper, f ront
5520
Bumper, rear (f or use with mid-mounted RX battery )
5185
Tires, rubber (2) (fits Traxxas® wheelie bar wheels)
5584
Wheelie bar/ rear skid (assembled) (f its Jato, requires 5515X f or
installation)
4976
Wheels (4)/ Axles (2), f or wheelie bar
5186A
Wheels, aluminum (blue-anodized) (2)/ 5x8mm ball bearings (4)/
axles (2)/ rubber tires (2)
5186
Wheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/
axles (2)/ rubber tires (2)
Chassis & Attachments
5515X
Battery Box, bumper (rear) (includes battery case with bosses f or
wheelie bar, cov er, and f oam pad)
3039
Battery holder, 4-cell (no on/of f switch) (f or Jato and others that use a
male Futaba sty le connector)
5530
Bulkheads, f ront (upper & lower)
5520
Bumper, rear (f or use with mid-mounted RX battery )
5523
Chassis top plate
5522
Chassis, 6061-T6 aluminum (3mm) (anodized blue)/ adhesiv e f oam
pad (1)
5522X
Chassis, 7075-T6 aluminum (3mm) (titanium-anodized)
(machined, lighter than stock)/ adhesive foam pad (1)
5592
Clutch guard
5522G
Complete Exo-Carbon Kit, Jato® (includes rear & mid-chassis
battery covers, receiver cover, dirt guards, suspension arms,
front bumper, & fuel tank cap)
5527
Dirt guards, chassis (left & right)
5527G
Dirt Guards, left & right, Exo-Carbon finish (Jato)
5560
Engine mount/ engine mount spacers (2)/ 3x15 CS with washers (4)/
4x18 BCS (2)/ f lat
-head engine mount screws 3x10 (2)
5581
Gaskets, dif f erential/transmission
5559
Mounts, suspension pin (rear anti-squat blocks) (1.5, 2.25, 3.0 & 3.75
degree) (1 each)
5524
Receiv er box cov er (f or chassis top plate)/ battery cov er (mid chassis)
5524G
Receiver cover (chassis top plate), Exo-Carbon finish (Jato®)
5516
Roll hoop/ EZ-Start® plug mount
5583
Rubber plugs, charge jack, two-speed adjustment (Jato)
5519
Serv o mounts, steering (lef t & right)
3038
Wiring harness, on-board radio sy stem (includes on/of f switch and
charge jack) (Jato)
Clutch & Related Parts
4609
Ball bearings (5x10x4mm) (2)
4611
Ball bearings (5x11x4mm) (2)
4118
Clutch bell, (18-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip
(requires #4609 - ball bearings, 5x10x4mm (2))
4120
Clutch bell, (20-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip
(requires #4611-ball bearings, 5x11x4mm (2)
4122
Clutch bell, (22-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip
(requires #4611-ball bearings, 5x11x4mm (2))
4124
Clutch bell, (24-tooth)/ 5x8x0.5mm f iber washer (2)/ 5mm E-clip
(requires #4611
-ball bearings, 5x11x4mm (2))
4146X
Clutch shoes (2)/ spring (T-Maxx®/Revo®/Jato®/Nitro 4-Tec ® )
3281
Cone, split bev eled
1633
E-clips/ C-rings
6542X
Flywheel (large, knurled for use with starter boxes)
5244
Fly wheel nut (TRX® 2.5, 2.5R, 3.3)
6542
Fly wheel with magnet (35mm)
1985
PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
Differential Components
5119
Ball bearings, blue rubber sealed (10x15x4mm) (2)
5580
Cov er, dif f erential
5136X
Differential oil kit (50cc of 1 each: 10K, 30K, 50K weights)
5581
Gaskets, dif f erential/transmission
5582
Gear set, dif f erential (output gears (2)/ spider gears (2)/ spider gear
shaf t)
5579
Gears, dif f erential 38-T (1)/ dif f erential driv e gear 20-T/ side cov er
plate (1)/ gasket (1)/ output gear seals (x
-ring) (2)/ 2.5x8mmCCS (4)/
5x10x.5mmTW (2)
5130
Oil, differential (100K wt) (0.7 oz (20cc))
5135
Oil, dif f erential (10K wt, 50cc)
5039
Oil, differential (500K wt, 20cc)
5137
Oil, differential (50K wt, 50cc)
2524
Screws, 2.5x8mm countersunk machine (hex driv e) (6)
2577
Screws, 3x10mm button-head machine (hex driv e) (6)
Driveline Components
5555
Carriers, stub axle (rear) (lef t & right)
5555X
Carriers, stub axle, (rear) 6061-T6 aluminum (titanium-anodized)
5528
Dif f erential output y okes (2)/yoke pins M3/12.5 (2)
5125
Drive cups, inner (2) (Jato®) (for steel constant-velocity
driveshafts)/ differential spider gears (2)/ gaskets, hardware
5551
Driv eshaf t assembly (1), lef t or right (f ully assembled, ready to install)/
M3/12.5mm y oke pin (1)
5126
Driveshaft, steel constant-velocity, Jato® (shaft only)/ drive cup
pin (1)
5551X
Driveshafts, Jato (steel constant-velocity) (assembled with inner
and outer dust boots) (1 pair)
5150
E-clips, 1.5mm (24)
5550
Half shaf t set, lef t or right (internal splined half shaf t/ external splined
half shaf t/ rubber boot/ metal U
-joints) (assembled with glued boot) (2
assemblies)
5127
Stub axle (1) (Jato®) (for steel constant-velocity driveshaft)
2754
Stub axle pins (4)
5553
Stub axles, (rear) (2)
1654
Wheel hubs, hex (2)/ stub axle pins (2)
Engine & Servo Mounts
5560
Engine mount/ engine mount spacers (2)/ 3x15 CS with washers (4)/
4x18 BCS (2)/ f lat
-head engine mount screws 3x10 (2)