Owner's manual

ManualsBrandsTreasure Garden ManualsFor HomeAG19

AG19

10’

Cantilever

Assembly and Operation Guide

www.treasuregarden.com

Summary of content (8 pages)

PAGE 2
Thank you for your purchase of Treasure Garden’s AG19 Cantilever Umbrella. WARRANTY: Please remove all contents from the package, inspect and review checklist. CAUTION: To reduce personal injury and damage to your AG19, read and follow this assembly and operation guide We recommend a two-person team for assembly and disassembly. Save information for future reference.
PAGE 3
S T E P 1 Assemble Cross Bar Stand AG19 Features To ATTACH VEGA Umbrella Light: Loosen the VEGA light adapter built into the umbrella runner by turning counter-clockwise (Fig. 17). After loosening, pull down light adapter post (Fig. 18) to attach the VEGA umbrella light (sold separately). To OPEN and ATTACH VEGA: Set cross bars in a cross position and attach bottom pole stem (Fig. 1) to cross bar stand with supplied bolts and washers (Fig. 2).
PAGE 4
S T E P 3 Opening AG19 S T E P 5 Turning AG19 Around the Pole Axis Hold the tilt degree handle (Fig. 6) on the cantilever and push it up until the shoulder is reached. Lock the umbrella by attaching the crank case to the support strut (Fig. 7). Turn the crank (Fig. 8) clockwise until the umbrella is fully opened and the hub (Fig. 9) is at the top most position. Loosen the base pole clamp by turning the clamp counter-clockwise. umbrella to the desired position.
PAGE 5
S T E P 3 Opening AG19 S T E P 5 Turning AG19 Around the Pole Axis Hold the tilt degree handle (Fig. 6) on the cantilever and push it up until the shoulder is reached. Lock the umbrella by attaching the crank case to the support strut (Fig. 7). Turn the crank (Fig. 8) clockwise until the umbrella is fully opened and the hub (Fig. 9) is at the top most position. Loosen the base pole clamp by turning the clamp counter-clockwise. umbrella to the desired position.
PAGE 6
S T E P 1 Assemble Cross Bar Stand AG19 Features To ATTACH VEGA Umbrella Light: Loosen the VEGA light adapter built into the umbrella runner by turning counter-clockwise (Fig. 17). After loosening, pull down light adapter post (Fig. 18) to attach the VEGA umbrella light (sold separately). To OPEN and ATTACH VEGA: Set cross bars in a cross position and attach bottom pole stem (Fig. 1) to cross bar stand with supplied bolts and washers (Fig. 2).
PAGE 7
Thank you for your purchase of Treasure Garden’s AG19 Cantilever Umbrella. WARRANTY: Please remove all contents from the package, inspect and review checklist. CAUTION: To reduce personal injury and damage to your AG19, read and follow this assembly and operation guide We recommend a two-person team for assembly and disassembly. Save information for future reference.