User guide

ManualsBrandsTreasure Garden ManualsFor HomeAG28SQ

AG28/AG28SQ

11’

/10’

Cantilever

Assembly and Operation Guide

www.treasuregarden.com

Summary of content (12 pages)

PAGE 2
Thank you for your purchase of Treasure Garden’s AG28/AG28SQ Cantilever Umbrella. Please remove all contents from the package, inspect and review checklist. CAUTION: To reduce personal injury and damage to your AG28/AG28SQ, read and follow this assembly and operation guide We recommend a two-person team for assembly and disassembly. Save information for future reference.
PAGE 3
S A F E T Y P R E C A U T I O N S : • Close the umbrella in windy conditions or when a storm approaches. Never allow the umbrella to flap in the wind; this could damage the canopy. • Do not leave open umbrella unattended. If damage occurs, this is not covered by the warranty. • When adjusting the umbrella, make sure that no person(s) or item(s) are close to the umbrella. This is important to prevent injury or material damage.
PAGE 4
S T E P 1 Assemble AG28/AG28SQ Base AG28/AG28SQ Features Select area to set base and place in desired location. Remove base lid from base shell and set aside (Fig. 1). Insert the base stem into the base shell (Fig. 2). Turn collar base stem in a clockwise motion to engage threading. Fill base shell with dry playground sand (not included). When filling base, it is necessary to wet down sand after partial installation. (Fig. 3) Fill base with remaining sand and repeat wet down.
PAGE 5
S T E P 2 Assemble AG28/AG28SQ Collar Base Stem AG28/AG28SQ Features Base Collar Swivel: Unlock the position of the umbrella by turning the collar of the base in a counter-clockwise direction (Fig. 16). Grab the bottom pole and rotate the umbrella frame (Fig. 17) in either direction to choose your desired location (Fig. 18). After desired location is chosen, return the base collar back to its original position and lock umbrella position by turning the collar clockwise (Fig. 19).
PAGE 6
S T E P 3 Assemble AG28/AG28SQ Frame To prevent scratching frame during assembly, lay umbrella parts on soft surface. Attach the bottom pole into the housing, bottom pole only fits one way. Line up holes and secure the two bolts with hexagon wrench (Fig. 9). Insert crank handle into socket A of housing (Fig. 10). Crank inner frame arm counter-clockwise until arm stops. To prepare base for umbrella, release collar base stem by turning the collar counter-clockwise (Fig. 11).
PAGE 7
S T E P 3 Assemble AG28/AG28SQ Frame To prevent scratching frame during assembly, lay umbrella parts on soft surface. Attach the bottom pole into the housing, bottom pole only fits one way. Line up holes and secure the two bolts with hexagon wrench (Fig. 9). Insert crank handle into socket A of housing (Fig. 10). Crank inner frame arm counter-clockwise until arm stops. To prepare base for umbrella, release collar base stem by turning the collar counter-clockwise (Fig. 11).
PAGE 8
S T E P 2 Assemble AG28/AG28SQ Collar Base Stem AG28/AG28SQ Features Base Collar Swivel: Unlock the position of the umbrella by turning the collar of the base in a counter-clockwise direction (Fig. 16). Grab the bottom pole and rotate the umbrella frame (Fig. 17) in either direction to choose your desired location (Fig. 18). After desired location is chosen, return the base collar back to its original position and lock umbrella position by turning the collar clockwise (Fig. 19).
PAGE 9
S T E P 1 Assemble AG28/AG28SQ Base AG28/AG28SQ Features Select area to set base and place in desired location. Remove base lid from base shell and set aside (Fig. 1). Insert the base stem into the base shell (Fig. 2). Turn collar base stem in a clockwise motion to engage threading. Fill base shell with dry playground sand (not included). When filling base, it is necessary to wet down sand after partial installation. (Fig. 3) Fill base with remaining sand and repeat wet down.
PAGE 10
S A F E T Y P R E C A U T I O N S : • Close the umbrella in windy conditions or when a storm approaches. Never allow the umbrella to flap in the wind; this could damage the canopy. • Do not leave open umbrella unattended. If damage occurs, this is not covered by the warranty. • When adjusting the umbrella, make sure that no person(s) or item(s) are close to the umbrella. This is important to prevent injury or material damage.
PAGE 11
Thank you for your purchase of Treasure Garden’s AG28/AG28SQ Cantilever Umbrella. Please remove all contents from the package, inspect and review checklist. CAUTION: To reduce personal injury and damage to your AG28/AG28SQ, read and follow this assembly and operation guide We recommend a two-person team for assembly and disassembly. Save information for future reference.