AKZ/AKZSQ AG28/AG28SQ 11’OC/10’SQ Canopy Replacement Assembly and Operation Guide www.treasuregarden.com ©2013 Treasure Garden, Inc. - All Rights Reserved. Rev.
AKZ/AKZSQ and AG28/AG28SQ CANOPY REPLACEMENT STEP 1 Make sure umbrella is in closed position (Fig. 1). For octagon canopies, please skip to Step 2. For square canopies, use a phillips screwdriver to unscrew all 8 screws from spring loaded rib end caps (Fig. 2) and set screws aside for later use. AKZSQ (Fig. 2) AG28SQ (Fig. 1) STEP 2 NOTE: A ladder and two-person team recommended for canopy removal and replacement.
STEP 6 STEP 3 Safely climb down ladder. Line up ends of canopy with spring loaded rib ends. From the top of the canopy, twist the back of the canopy towards you so you can access the velcro and zipper (Fig. 4). Open velcro flap and unzip canopy (Fig. 5). Begin to slide canopy down ribs (Fig. 6). Safely step down ladder and continue to remove canopy (Fig. 7). For octagon canopies, slide spring loaded rib ends into canopy pockets located under canopy (Fig. 15). (Fig.
STEP 4 STEP 5 Unfold new replacement canopy. Gather bottom of canopy (larger opening) to the top of canopy (smaller opening). When you reach the top of the umbrella, slide canopy down under cap (Fig. 12). NOTE: Make sure velcro and zipper on canopy are facing the back side (towards the canopy support arm). Velcro top together first to keep canopy from sliding back down ribs (Fig. 13). Zip up canopy and velcro flap together (Fig. 14). Tuck canopy under cap.
STEP 4 STEP 5 Unfold new replacement canopy. Gather bottom of canopy (larger opening) to the top of canopy (smaller opening). When you reach the top of the umbrella, slide canopy down under cap (Fig. 12). NOTE: Make sure velcro and zipper on canopy are facing the back side (towards the canopy support arm). Velcro top together first to keep canopy from sliding back down ribs (Fig. 13). Zip up canopy and velcro flap together (Fig. 14). Tuck canopy under cap.
STEP 6 STEP 3 Safely climb down ladder. Line up ends of canopy with spring loaded rib ends. From the top of the canopy, twist the back of the canopy towards you so you can access the velcro and zipper (Fig. 4). Open velcro flap and unzip canopy (Fig. 5). Begin to slide canopy down ribs (Fig. 6). Safely step down ladder and continue to remove canopy (Fig. 7). For octagon canopies, slide spring loaded rib ends into canopy pockets located under canopy (Fig. 15). (Fig.
AKZ/AKZSQ and AG28/AG28SQ CANOPY REPLACEMENT STEP 1 Make sure umbrella is in closed position (Fig. 1). For octagon canopies, please skip to Step 2. For square canopies, use a phillips screwdriver to unscrew all 8 screws from spring loaded rib end caps (Fig. 2) and set screws aside for later use. AKZSQ (Fig. 2) AG28SQ (Fig. 1) STEP 2 NOTE: A ladder and two-person team recommended for canopy removal and replacement.
AKZ/AKZSQ AG28/AG28SQ 11’OC/10’SQ Canopy Replacement Assembly and Operation Guide www.treasuregarden.com ©2013 Treasure Garden, Inc. - All Rights Reserved. Rev.