AKZ13/AKZRT/AKZSQ11 AKZ/AKZSQ 13’OC/10’x13’RT/11.5’SQ 11’OC/10’SQ Cantilever Assembly and Operation Guide www.treasuregarden.com ©2014 Treasure Garden, Inc. - All Rights Reserved. Rev.
Thank you for your purchase of Treasure Garden’s AKZ Cantilever Umbrella. WARRANTY: Please remove all contents from the package, inspect and review checklist. CAUTION: To reduce personal injury and damage to your umbrella, read and follow this assembly and operation guide. We recommend a two-person team for assembly and disassembly. Save information for future reference.
S A F E T Y P R E C A U T I O N S : • Close the umbrella in windy conditions or when a storm approaches. Never allow the umbrella to flap in the wind; this could damage the canopy. • Do not leave open umbrella unattended. If damage occurs, this is not covered by the warranty. • When adjusting the umbrella, make sure that no person(s) or item(s) are close to the umbrella. This is important to prevent injury or material damage.
S T E P 1 Rotating Hub Assembly AKZ Features If you have already installed your rotating hub onto your base or mount kit, please skip to Step 2. Remove rotating hub from the main frame by removing the (2) main frame bolts and (2) washers (Fig. 1), set aside bolts for later use. Now, place rotating hub onto base plate (if installing onto a mount kit), inverted plate (if installing onto BASE-AKZ) or base frame (if installing onto BASE-13) (Fig. 2) and tighten with (5) supplied hub bolts and washers (Fig.
S T E P 2 Umbrella Assembly AKZ Features To OPERATE the 360° Rotating Hub Swivel: Place your foot on the foot pedal of the rotating hub and step-on the base pedal to release rotating lock (Fig. 16). Place one hand on the main frame and one hand on the tilt lever (Fig. 17), swivel the umbrella frame in either direction until desired position is reached (Fig. 18). Step off the foot pedal to engage rotating lock and lock position (you will hear the pedal click, as it reaches the next available lock position).
S T E P 3 Operation To Open Canopy: Slowly turn the crank lift handle clockwise to open the umbrella to a level position (Fig. 7). CAUTION: Stop turning the crank handle as soon as the umbrella cover is completely open and the sleeve on the umbrella pole has reached its maximum height (Fig. 8). WARNING: Do not continue to crank once umbrella canopy is completely open, it may impair your ability to disengage the tilt lever. IMPORTANT: PRIOR TO USING THE TILT FEATURE.
S T E P 3 Operation To Open Canopy: Slowly turn the crank lift handle clockwise to open the umbrella to a level position (Fig. 7). CAUTION: Stop turning the crank handle as soon as the umbrella cover is completely open and the sleeve on the umbrella pole has reached its maximum height (Fig. 8). WARNING: Do not continue to crank once umbrella canopy is completely open, it may impair your ability to disengage the tilt lever. IMPORTANT: PRIOR TO USING THE TILT FEATURE.
S T E P 2 Umbrella Assembly AKZ Features To OPERATE the 360° Rotating Hub Swivel: Place your foot on the foot pedal of the rotating hub and step-on the base pedal to release rotating lock (Fig. 16). Place one hand on the main frame and one hand on the tilt lever (Fig. 17), swivel the umbrella frame in either direction until desired position is reached (Fig. 18). Step off the foot pedal to engage rotating lock and lock position (you will hear the pedal click, as it reaches the next available lock position).
S T E P 1 Rotating Hub Assembly AKZ Features If you have already installed your rotating hub onto your base or mount kit, please skip to Step 2. Remove rotating hub from the main frame by removing the (2) main frame bolts and (2) washers (Fig. 1), set aside bolts for later use. Now, place rotating hub onto base plate (if installing onto a mount kit), inverted plate (if installing onto BASE-AKZ) or base frame (if installing onto BASE-13) (Fig. 2) and tighten with (5) supplied hub bolts and washers (Fig.
S A F E T Y P R E C A U T I O N S : • Close the umbrella in windy conditions or when a storm approaches. Never allow the umbrella to flap in the wind; this could damage the canopy. • Do not leave open umbrella unattended. If damage occurs, this is not covered by the warranty. • When adjusting the umbrella, make sure that no person(s) or item(s) are close to the umbrella. This is important to prevent injury or material damage.
Thank you for your purchase of Treasure Garden’s AKZ Cantilever Umbrella. WARRANTY: Please remove all contents from the package, inspect and review checklist. CAUTION: To reduce personal injury and damage to your umbrella, read and follow this assembly and operation guide. We recommend a two-person team for assembly and disassembly. Save information for future reference.
AKZ13/AKZRT/AKZSQ11 AKZ/AKZSQ 13’OC/10’x13’RT/11.5’SQ 11’OC/10’SQ Cantilever Assembly and Operation Guide www.treasuregarden.com ©2014 Treasure Garden, Inc. - All Rights Reserved. Rev.
