Assembly Instructions

Thank you for purchasing Treasure Garden’s AKZ Plus Cantilever.
Please remove all contents from the package, inspect and review checklist.
Some parts may be included in the styrofoam packaging.
Do not discard any packaging or box until assembly is complete.
CHECKLIST
101
!
WARRANTY:
Treasure Garden warrants this product
(for residential use ONLY) to be free
from defects in original materials and
workmanship for a period of 2 years from
the date of purchase. If a defect in the
original material or workmanship appears
during the warranty period; Treasure
Garden will (at its discretion) repair or
replace the product without charge.
Simply contact your original authorized
Treasure Garden dealer with a description
of the defect. The dealer will verify the
defect and work closely with Treasure
Garden to obtain the necessary service.
In many cases, simple problems can
be solved with a replacement part that
can be shipped directly to the dealer for
professional installation / repair.
In the event that warranted factory service
is required, Treasure Garden will assume
the responsibility of the return freight
charges on warranted product for the first
year only.
Returned product that (upon receipt and
inspection) is deemed to be “not covered”
under our warranty, will be shipped / billed
at your expense.
This warranty gives you specific legal
rights, and you may have other rights
which vary from state to state.
RUST: Rust is a natural part of the aging
process of steel or iron based materials,
and is therefore NOT considered a defect.
NOTE: Failure caused by unreasonable or
abusive use, or failure caused by neglect
of reasonable and necessary care are not
covered by this warranty.
Additionally, acts of nature (including but
not limited to wind, hurricanes, tornadoes,
and storms) are not covered by this
warranty.
E
H
I
D
L
J
M
Loop Lock
Spring Loaded
Rib End Cap (8)
(5) Hub Bolts
(5) Washers
(1) 8mm Hexagon Wrench
(1) 6mm Hexagon Wrench
(1) 2.5mm Hexagon Wrench
A
B
K
N
G
F
C
A - (1) 360° Rotating Hub H - (1) Canopy Support Beam
B - (1) Foot Pedal I - (1) Canopy
C - (1) Crank Lift Handle J - (1) Light Adapter (light sold separately)
D - (1) Main Frame K - (1) Valance (optional)
E - (1) Tilt Lever L - (8) Spring Loaded Rib End Cap
F - (1) Main Frame Grip M - (1) Hardware Assembly
G - (1) Tilt Degree Scale N - (1) Power Supply* (Starlux style only)
O - (1) Protective Cover (not shown)
*NOTE: Use only the Power Supply included with umbrella. See page 9 for Safety Precautions.
IMPORTANT:
Prior to assembly it is important to decide on the location of the umbrella.
· Allow ample height to avoid damage to your umbrella during assembly and usage.
· Choose a location that is level and sturdy.
· Avoid any sloping of soft ground.
· Consider a location that will maximize the umbrella’s 360° rotating function. Placing the
umbrella between two entertaining areas is idea.
CAUTION:
· Fully assembled, the umbrella weighs over 500 lbs. Moving umbrella fully assembled
will increase the risk of damage to your umbrella and/or can cause serious injury. We
recommend a two-person team for assembly and disassembly.
CARE AND MAINTENANCE
• When not in use, close and cover umbrella with provided protective cover.
• Store rechargeable battery pack and power supply in dry place.
• Allow a wet canopy to dry while in open position, but do not leave unattended.
• If necessary, clean the fabric with lukewarm water, mild detergent, and a sponge.
• Wipe sliding marks on the aluminum poles with a damp cloth.
Winter Storage:
• Store in a dry place.
After the Winter:
• Check the condition and function of the umbrella. Any defects must be repaired by a
professional.