Assembly Instructions

NOTE: The transformer output power is 5VDC 2A. It is normal for transformer to get warm

after long period of use. Avoid sun and water on power supply to increase lifetime use. Be

sure not to drop transformer. NOTE: Use only the Power Supply provided.

STEP

TILTING UMBRELLA

To Tilt Canopy Vertically:

IMPORTANT: PRIOR TO USING TILT FEATURE.

To avoid personal injury or damage to the umbrella, make sure the area behind you is clear

and free from any furniture or structure.

Position yourself behind umbrella. Squeeze main frame grip handle (Fig. 13) to disengage

from track (Fig. 14) and guide main frame grip down main frame until desired degree of

vertical shade is reached (maximum back angle of 40˚ from ground level) (Fig. 15). Release

grip handle to lock into place. WARNING: Make sure tilt is secure in track. Do not tilt

umbrella past the track. Keep hands free of main frame while moving grip handle up and

down.

Max. 40°

(Fig. 13) (Fig. 14) (Fig. 15)

Track

Turn umbrella lights on by pressing button located under plug (Fig. 11). Lights will initially

turn on high setting (Fig. 12). For low setting, press button once more. To turn off lights,

press button a third time. WARNING: We do not recommend use of lights while raining.

See Safety Precautions on page 9.

(Fig. 11) (Fig. 12)

When lights are not in use, unplug power supply from wall and umbrella. Store power

supply in dry, cool area to keep from damaging.

(Fig. 23)

(Fig. 24)

(Fig. 25) (Fig. 26)

STEP

LIGHT ADAPTER FEATURE

To Open Light Adapter:

• Loosen the light adapter built into the umbrella runner by turning counter-clockwise

(Fig. 23).

• After loosening, pull down light adapter post (Fig. 24).

To Open and Attach Umbrella Light: (light sold separately)

• Open the umbrella light and attach to light adapter post (Fig. 25).

• Snap to close (Fig. 26).

To Remove Umbrella Light and Close Light Adapter:

• Remove umbrella light from light adapter post (Fig. 25).

• Gently push up the light adapter post back into umbrella runner and tighten turning

clockwise (Fig. 23).

Note:

• It may be necessary to lower umbrella to a reachable height to pull light adapter down

and attach umbrella light.

• It is not necessary to remove light to close umbrella.