Manual Guide

S T E P 3

Depending on your cantilever model, velcro and/or zipper styles may vary.

From the top of the canopy, open velcro flap(s) and unzip (if applicatable) canopy (Fig. 4).

Begin to slide canopy down ribs (Fig. 5). Safely step down ladder and continue to remove

canopy (Fig. 6).

(Fig. 4)

(Fig. 5)

(Fig. 6)

S T E P 6

Safely climb down ladder. Line up ends of canopy with spring loaded rib ends.

For octagon canopies, slide spring loaded rib ends into canopy pockets located under

canopy (Fig. 15).

(Fig. 16)

For square and rectangle canopies, attach 8 screws

back onto end of canopy and spring loaded rib end

caps (Fig. 16).

Smooth out canopy as necessary. Your umbrella is now ready for use.

(Fig. 15)