Canopy Replacement AKZP/AKZ/AG28/AG78/AG19 Octagon/Square/Rectangle Styles Instruction Manual www.treasuregarden.com ©2019 Treasure Garden, Inc. - All Rights Reserved. Rev.
CANTILEVER CANOPY REPLACEMENT STEP 1 Make sure umbrella is in closed position (Fig. 1). For octagon canopies, please skip to Step 2. For square and rectangle canopies, use a phillips screwdriver to unscrew all 8 screws from spring loaded rib end caps (Fig. 2) and set screws aside for later use. (Fig. 2) Style Examples (Fig. 1) STEP 2 NOTE: A ladder and two-person team recommended for canopy removal and replacement.
STEP 6 STEP 3 Safely climb down ladder. Line up ends of canopy with spring loaded rib ends. Depending on your cantilever model, velcro and/or zipper styles may vary. For octagon canopies, slide spring loaded rib ends into canopy pockets located under canopy (Fig. 15). From the top of the canopy, open velcro flap(s) and unzip (if applicatable) canopy (Fig. 4). Begin to slide canopy down ribs (Fig. 5). Safely step down ladder and continue to remove canopy (Fig. 6). (Fig.
STEP 4 STEP 5 Unfold new replacement canopy. Gather bottom of canopy (larger opening) to the top of canopy (smaller opening). When you reach the top of the umbrella, slide canopy down under cap (Fig. 12). NOTE: Make sure velcro and zipper on canopy are facing the back side (towards the canopy support arm). Velcro top together first to keep canopy from sliding back down ribs (Fig. 13). Zip up canopy and velcro flap together (Fig. 14). Tuck canopy under cap.
STEP 4 STEP 5 Unfold new replacement canopy. Gather bottom of canopy (larger opening) to the top of canopy (smaller opening). When you reach the top of the umbrella, slide canopy down under cap (Fig. 12). NOTE: Make sure velcro and zipper on canopy are facing the back side (towards the canopy support arm). Velcro top together first to keep canopy from sliding back down ribs (Fig. 13). Zip up canopy and velcro flap together (Fig. 14). Tuck canopy under cap.
STEP 6 STEP 3 Safely climb down ladder. Line up ends of canopy with spring loaded rib ends. Depending on your cantilever model, velcro and/or zipper styles may vary. For octagon canopies, slide spring loaded rib ends into canopy pockets located under canopy (Fig. 15). From the top of the canopy, open velcro flap(s) and unzip (if applicatable) canopy (Fig. 4). Begin to slide canopy down ribs (Fig. 5). Safely step down ladder and continue to remove canopy (Fig. 6). (Fig.
Canopy Replacement AKZP/AKZ/AG28/AG78/AG19 Octagon/Square/Rectangle Styles Instruction Manual www.treasuregarden.com ©2019 Treasure Garden, Inc. - All Rights Reserved. Rev.