Owner's manual

411
Large
Hexagon Wrench
(Fig. 7)
(Fig. 8)
(Fig. 9)
S T E P 2 Umbrella Assembly
Two-persons recommended for team lift and to complete assembly.
With base cover in place, insert the main frame onto the rotating hub (Fig. 7) {align with foot
pedal}. In upright position, insert (2) bolts and (2) washers and tighten using large hexagon
wrench provided (Fig. 8). Install the crank lift handle onto the mid-area of the main frame
(Fig. 9).
REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO
OPENING UMBRELLA. CHECK UNDER CANOPY FOR PACKAGING AROUND RIBS.
To use iPod or MP3:
Install iPod/Remote Holder onto side of main frame grip. Line up holes on back side of
holder to main frame grip and slide into place (Fig. 33). Holder can hold remote control or
your iPod/MP3 player.
Plug one end of the music adapter cord to the iPod or MP3 and plug the other end into
the media center (Fig. 34). Select music to play on your iPod/MP3. Make sure the volume
is all the way up on your iPod/MP3 and use the volume controls on the media center or
remote control to adjust volume.
Slide cover over holder to protect accessory (Fig. 35).
(Fig. 33)
(Fig. 34)
(Fig. 35)