Garden Pavilion 12’x12’SQ Aluminum Assembly and Operation Guide www.treasuregarden.com ©2011 Treasure Garden, Inc. - All Rights Reserved.
The Garden Pavilion and its parts are packaged in four (4) separate cartons. WARRANTY: Carton contents include: CARTON 1 - Vertical Corner (Upright) Posts | Angled Poles | Light Pole CARTON 2 - Horizontal Side Beams CARTON 3 - Corner Joints and Pavilion Hardware CARTON 4 - Pavilion Fabrics (Roof, Corners, Ties, and Walls) Please remove all contents from each carton, inspect and review part list.
Garden Pavilion Features PAVILION PART LIST (continued from page 1) Hang Accessories: Attach light pole to top plate inside Garden Pavilion. Can be used with or without S-Hook. Part Description Qty.
S T E P 9 Secure Roof Mounting and Application Options Clip canopy track anchors (attached to roof) to each horizontal side beam (5 per side). Pull each side down along with the fabric corners and on the track anchor to make the roof tight. Secure with attachment strips. Repeat for each corner. Prepare mounting and set aside for later installation. Standard Mounting Set-Up: Locate and attach #2 vertical corner (upright) post onto #13 mounting plate. Tighten #12 knob. Repeat for each post.
S T E P 7 Attach Corners S T E P 1 Prepare Horizontal Side Beams Attach fabric corners to the track hooks, then slide track hooks into the horizontal side beam track to the outside corners (6 per corner). Insert plug to secure. Repeat for all corners. Slide #5 track adapter into sides of the #3 horizontal side beam, one track adapter per beam end. Repeat for each horizontal side beam.
S T E P 3 Assemble Top Section (Two-person Assembly) With all corner joints connected to horizontal side beams - attach each #1 angled pole to top corner joints, push firmly. Bring all beams together at top center (track side down), slide #9 top connection into each angled pole, bring together with #10 center hub, then insert #16 hexagon screws and tighten using #14 hexagon wrench (Large).
S T E P 3 Assemble Top Section (Two-person Assembly) With all corner joints connected to horizontal side beams - attach each #1 angled pole to top corner joints, push firmly. Bring all beams together at top center (track side down), slide #9 top connection into each angled pole, bring together with #10 center hub, then insert #16 hexagon screws and tighten using #14 hexagon wrench (Large).
S T E P 7 Attach Corners S T E P 1 Prepare Horizontal Side Beams Attach fabric corners to the track hooks, then slide track hooks into the horizontal side beam track to the outside corners (6 per corner). Insert plug to secure. Repeat for all corners. Slide #5 track adapter into sides of the #3 horizontal side beam, one track adapter per beam end. Repeat for each horizontal side beam.
S T E P 9 Secure Roof Mounting and Application Options Clip canopy track anchors (attached to roof) to each horizontal side beam (5 per side). Pull each side down along with the fabric corners and on the track anchor to make the roof tight. Secure with attachment strips. Repeat for each corner. Prepare mounting and set aside for later installation. Standard Mounting Set-Up: Locate and attach #2 vertical corner (upright) post onto #13 mounting plate. Tighten #12 knob. Repeat for each post.
Garden Pavilion Features PAVILION PART LIST (continued from page 1) Hang Accessories: Attach light pole to top plate inside Garden Pavilion. Can be used with or without S-Hook. Part Description Qty.
The Garden Pavilion and its parts are packaged in four (4) separate cartons. WARRANTY: Carton contents include: CARTON 1 - Vertical Corner (Upright) Posts | Angled Poles | Light Pole CARTON 2 - Horizontal Side Beams CARTON 3 - Corner Joints and Pavilion Hardware CARTON 4 - Pavilion Fabrics (Roof, Corners, Ties, and Walls) Please remove all contents from each carton, inspect and review part list.
Garden Pavilion 12’x12’SQ Aluminum Assembly and Operation Guide www.treasuregarden.com ©2011 Treasure Garden, Inc. - All Rights Reserved.
