Assembly Instructions

43
STEP
7
CLOSING UMBRELLA
Twist collar in counter-clockwise direction to bring umbrella
back to a horizontal position. Turn crank handle in
counter-clockwise direction to close umbrella. Tie string
around canopy and cover umbrella with a protective cover
(sold separately).
STEP
4
OPENING & TILTING UMBRELLA
Crank handle clockwise to open umbrella to its
fully open position. To tilt, simply twist the collar
in clockwise direction until desired tilt position is
reached.
Attach rechargeable battery pack onto bottom pole.
Charging Battery Pack:
IMPORTANT: You must fully charge battery pack prior to first use.
To charge battery, remove plug cap from charging port
on battery pack. Using the power supply included with
umbrella, insert power supply into charging port. Plug
other end of power supply into wall outlet for 6 hours to
fully charge. When fully charged, all 4 lights displayed on
battery pack will be illuminated.
Battery Status: Lights on the battery pack will indicate battery
charge level. Four lights indicates full charge, while one is low
battery. When battery is low, you may charge battery pack while
attached to frame, or removed from frame, using power supply
included with umbrella.
Note: The transformer output power is 5VDC 2A. During prolonged use, it is normal for the
power supply to be warm to the touch. When using power supply, avoid direct sunlight and
exposure to moisture.
To tilt
On/Off Switch
USB Port
STEP
5
LIGHTS
To turn umbrella lights on or off, press on/off switch located
on collar housing.
WARNING: We do not recommend use of lights while
raining. When lights are not in use, remove battery pack
from umbrella. Store battery pack, along with power supply
in dry, cool area to keep from damaging.
STEP
6
USB PORT
To charge electronic devices, remove plug from USB port.
Insert USB cable into USB port. Reattach plug when not
in use. NOTE: If using USB port and lights, battery life will
reduce to 4 hours.