User Manual

11
CHARGING AND BATTERY
TREBLAB E3 support PD quick charging protocol, so you can charge them
with your USB Type-C charger or Power Bank with quick charge. When PD quick
charge protocol is detected, you will see the ANC LED shining white.
Also, you can charge the headphones by plugging the supplied cable into the USB
Type-C charging port on the right ear-cup and the other end of the charging cord
into a standard USB port. The LED light will turn red. It takes up to 1 hour to charge
the E3 fully. The red light will turn off when the headphones are fully charged.
One full battery charge provides up to 2 days of playtime at medium volume
w/o ANC and up to 27 hours at 100% volume with the ANC activated function.
The incredible quick charge function lets you use your headphones up to 7 hours
ƊɈׁ׀׀ڭɨȌǶɐǿƵɩشȌy!ƊǏɈƵȲǯɐȺɈ׃ǿǞȁȌǏƧǘƊȲǐǞȁǐƦɯׅßشׂȺɈƊȁƮƊȲƮƧǘƊȲǐƵȲ
ƊȁƮƵɨƵȁǿɐƧǘǶȌȁǐƵȲɩǞɈǘ׉ßشׂةׁׂßشׁخׅȱɐǞƧDzƧǘƊȲǐƵƧǘƊȲǐƵȲخ
When the battery is running low, you will hear the “Battery Low” voice prompt.
ƵȺɐȲƵ ɈȌɐȺƵ ȁȌ ǶƵȺȺ ɈǘƊȁׅß(!ةׂ ƊƮƊȯɈƵȲȌȲ ƧǘƊȲǐƵȲخÇȺǞȁǐ Ɗ ȯȌɩƵȲȺȌɐȲƧƵ
with lower power will increase the overall charging time. Unplug the E3 from
the charging cable and the cable from the power source when not in use.
If left unused, a fully charged battery will lose its charge over time.
We recommend charging the TREBLAB E3 fully at least twice a month to maintain
ɈǘƵȺɐǏ˛ƧǞƵȁɈƦƊɈɈƵȲɯǶǞǏƵخ