User Manual
5
SETTING UP YOUR TREBLAB E3
Turn ON
àǘƵȁɐȺǞȁǐɈǘƵǘƵƊƮȺƵɈǏȌȲɈǘƵ˛ȲȺɈɈǞǿƵةȯȲƵȺȺɈǘƵPOWER button for 5 seconds
ɐȁɈǞǶɈǘƵȲƵƮm0(ȺɈƊȲɈȺ˜ƊȺǘǞȁǐخÀǘƵȁȲƵǶƵƊȺƵɈǘƵƦɐɈɈȌȁخÀǘƵƮƵɨǞƧƵɩǞǶǶǐƵɈǞȁɈȌ
pairing mode. For further use, press the POWER button for 3 seconds. You will hear
ɈǘƵٗ§ȌɩƵȲy٘ɨȌǞƧƵȯȲȌǿȯɈةƊȁƮɈǘƵȲƵƮm0(ǶǞǐǘɈɩǞǶǶȺɈƊȲɈ˜ƊȺǘǞȁǐخ
Turn OFF
Press and hold the POWER button for 5 seconds. You will hear the “Power OFF”
ɨȌǞƧƵȯȲȌǿȯɈةƊȁƮɈǘƵȲƵƮm0(ɩǞǶǶ˜ƊȺǘɈɩȌɈǞǿƵȺخ
PAIRING
Make sure TREBLAB E3 are charged and the 3.5 mm Audio cable is not plugged in.
1. Press and hold the POWER button for 3 seconds. You will hear the “Power ON”
voice prompt. Do not release the button for a few additional seconds until you
ǘƵƊȲɈǘƵٗ§ƊǞȲǞȁǐ٘ɨȌǞƧƵȯȲȌǿȯɈةƊȁƮɈǘƵm0(ɩǞǶǶȺɈƊȲɈ˜ƊȺǘǞȁǐȲƵƮǞȁƮǞƧƊɈǞȁǐɈǘƊɈ
the E3 are in pairing mode.
2. Activate Bluetooth mode on your smart device and keep it within 3 feet / 1 m from
the TREBLAB E3 while pairing.
3. Scan/search for available devices in your smart device.
4. Select the TREBLAB E3 from the list.
5. If prompted the password, enter “0000”.
6. Once the E3 are successfully paired and connected, you will hear the “Connected”
ɨȌǞƧƵȯȲȌǿȯɈةƊȁƮɈǘƵm0(ɩǞǶǶȺɈƊȲɈ˜ƊȺǘǞȁǐƦǶɐƵȺǶȌɩǶɯخ
NOTE: The TREBLAB E3 headphones can be connected to only one device
at a time.