Use and Care Guide

6
To connect the E3 to the second device:
1. ²ɩǞɈƧǘȌǏǏ ǶɐƵɈȌȌɈǘǿȌƮƵȌȁɈǘƵ˛ȲȺɈƮƵɨǞƧƵɈǘƵǘƵƊƮȯǘȌȁƵȺƊȲƵƧȌȁȁƵƧɈƵƮɈȌخ
2. Repeat pairing steps 1-6 and connect the other device.
When you turn the earbuds on, they will try to reconnect with recently connected
device/devices. If the reconnection does not happen automatically, the earbuds
ɩǞǶǶ ɈȲɯ ɈȌ ˛ȁƮ ɈǘƵ ȁƵɮɈ ƮƵɨǞƧƵ Ǟȁ ɈǘƵ ȯƊǞȲǞȁǐ ǶǞȺɈخ ÀǘƵ ǘƵƊƮȯǘȌȁƵȺ ƧƊȁ ȺƊɨƵ ɐȯ
to 8 devices.
AUX-IN CONNECTION
You can connect the TREBLAB E3 to compatible devices using the supplied 3.5
mm Audio cable.
Plug the USB Type-C end of the Audio cable into the USB Type-C charging port /
AUX Line-in port on the right earcup and plug the other 3.5 mm end into the AUX
jack on your device.
NOTE: ÀǘƵǏɐȁƧɈǞȌȁȺyƵɮɈة§ȲƵɨǞȌɐȺة§ƊɐȺƵƊȁƮßȌǶɐǿƵƊȲƵȁȌɈƊɨƊǞǶƊƦǶƵɩǘƵȁɐȺ-
ing the 3.5 mm Audio cable. You will need to make all the adjustments using your
smart device.
Please keep the ANC function off while connected with a line-in audio cable.
AUDIO PLAYBACK
Bluetooth mode
To pause and resume the playback when connected wirelessly, press shortly
the PHONE button.
To adjust the volume, press shortly the Volume+ button to turn the volume up
and Volume- button to turn the volume down.