User Manual

Turn on your speaker by pressing and holding the POWER button for 3 seconds.
You will hear the sound cue, and the LED will start flashing BLUE indicating that the
speaker is in pairing mode.
Activate the Bluetooth mode on your device (smartphone, tablet, laptop).
Select TREBLAB HD7 from the Bluetooth devices list. Keep it within 3 feet / 1
meter from the speaker while pairing.
If necessary, enter the passcode 0000.
Once HD7 is successfully paired and connected, the LED will stop flashing and
stay BLUE.
1.
2.
3.
4.
5.
REPAIRING
After the initial pairing, the speaker will automatically connect to the previously
paired device when turned on again. If the reconnection does not happen
automatically, the speaker will start looking for any other previously paired device
within the effective distance range. TREBLAB HD7 can save up to 8 recently
paired devices.