XR 800 Bluetooth earbuds User’s Manual Please read this manual before using the product
1. 2. 3. L M S 5. 6. XR800 4. 7. 1. TREBLAB XR800 2. Carrying case 3. Charging cable 4. Round Treblab logo sticker 5. Silicone ear-tips 6. Cord minder 7. Insert card 8. User’s manual 8.
Thank you for choosing TREBLAB XR800! The earphones provide superior sound quality and mobility combined with light-weight construction and the convenience of hands-free Bluetooth operation. Before using this product, please read this manual.
Function Operation Power On Press and hold the POWER button for 2 seconds. Power Off Press and hold the POWER button for 4 seconds. Pause / Play Press the POWER button. Volume + Press the Volume + button. Volume - Press the Volume - button. Next track Press and hold the Volume + button for 2 seconds. Previous track Press and hold the Volume - button for 2 seconds. Answering Call Press the POWER button during the incoming call. End Call Press the POWER button during the conversation.
WEARING YOUR HEADSET Using appropriate-size ear-tips is critical for maximum external noise isolation and a snug secure fit. It is also common to have different sized ear canals, so try on the ear-tips one at a time to find the best fit for each side. Better to try the various sizes of silicone tips supplied with XR800. To seat the XR800 earbuds firmly, try gently pulling on the outer rim of your ear to ease the tip into a comfortable position.
SETTING UP YOUR TREBLAB XR800 Turn ON Press and hold the POWER button for 2 seconds. You will hear a “Power ON” voice prompt, and the blue & red LED light will start flashing. Turn OFF Press and hold the POWER button for 4 seconds. You will hear a “Power OFF” voice prompt, and the flashing blue LED light will go off. PAIRING Make sure TREBLAB XR800 is charged and turned OFF. 1. Press and hold the POWER button on the right earbud.
MULTIPOINT CONNECTION TREBLAB XR800 earbuds have a multipoint connection. It allows two devices to be connected to at the same time. While you won't receive the input from both devices at the same time, you'll be able to transition from one device to another seamlessly. To connect XR800 to the second device: 1. Temporarily switch OFF the Bluetooth on the first device you’re connected to. 2. Repeat pairing steps 1-6 and connect the other device. 3. Turn the Bluetooth back ON for the first device.
PHONE CALLS MANAGEMENT TREBLAB XR800 can be used to make and receive phone calls when connected via Bluetooth. The audio playback will be paused during calls. To Answer Call: Press the POWER button during the incoming call. To Reject Call: Press and hold the POWER button for 2 seconds. To End Call: Press the POWER button while on the phone. To Put On Hold: Double press the POWER button while on the phone. CHARGING Use only the provided USB/micro USB cable to charge the earbuds.
When not in use, unplug XR800 from the charging cable and the cable from the power source. Don't overcharge the earbuds as it may lead to premature battery degradation and voidance of the manufacturer’s warranty. If the headset is left unused, even the fully charged battery will lose its charge over time. We recommend charging fully TREBLAB XR800 at least twice a month to maintain a sufficient battery life. TROUBLESHOOTING Problem Solution Not powering on Make sure the headset is fully charged.
This will force the headset to forget previously paired devices. Repeat the steps for pairing as previously described. Not finding a Bluetooth driver on your laptop Make sure your laptop supports the Bluetooth connection. If it doesn’t, you will need an external Bluetooth USB adapter compatible with your laptop. For further details, consult with your laptop manufacturer. Frequent disconnection and noise Make sure that the distance between your device and the headset is less than 33 feet/10 meters.
RESTORE FACTORY SETTINGS To restore the earphones back to the factory settings: 1. Power on XR800 2. Press and hold the Volume + and the POWER button for 5 seconds until you hear the double-beep sound and “Your headset is disconnected” voice prompt. The blue LED will light up 3. Now the earphones are restored back to the factory settings and ready to be paired again. SAFETY RULES Don’t disassemble or modify your earbuds for any reason.
Do not use for swimming, diving into water, snorkeling or scuba diving, high-speed watersports, etc. RECYCLING The earphones can be recycled, and they should be in order to keep our planet clean. Where should you bring them? In the US, there are a couple of options: 1. Best Buy has a recycling program. Just take the broken earbuds with you next time you visit a Best Buy store. This link will help you to find the best location: https: //www.bestbuy.com/site/store-locator/ 2.
SPECIFICATIONS Battery: Up to 9 hours playtime (moderate volume) Up to 6 hours (100% volume) 100mAh, 3.7V, rechargeable Li-Ion Input 5V / 1A Charging time: Up to 2 hours Voice assistant activation: Supported by the POWER button double press Bluetooth version: BT5.0, HFP v1.7, A2DP v1.3, AVRCPv1.5 Signal Range: 33ft / 10m Frequency response: 20Hz − 20KHz Water resistance: IPX7 Charging port: Micro-USB Dimensions: 1.41 x 1.3 x 0.35in / 36 x 33 x 9mm / Weight: 21g / 0.74oz/ 0.
THANK YOU We truly appreciate that you chose TREBLAB as your trusted brand of Bluetooth earphones. Our team sincerely hopes that you enjoy the great sound and seamless usability TREBLAB XR800 provide. We love making our customers happy by providing true value with our products. If for any reason you are not completely satisfied with your purchase or have any questions, please let us know by contacting us at http: //treblab.com/contact_us.
1 YEAR WARRANTY Parts and Labor Warranty. Please visit www.treblab.com to register YOUR product.
