Use and Care Guide

PHONE CALLS MANAGEMENT
TREBLAB XR800 can be used to make and receive
phone calls when connected via Bluetooth. The audio
playback will be paused during calls.
Press the POWER button during
the incoming call.
Press and hold the POWER
button for 2 seconds.
Press the POWER button while
on the phone.
Double press the POWER button
while on the phone.
To Answer Call:
To Reject Call:
To End Call:
To Put On Hold:
CHARGING
Use only the provided USB/micro USB cable to
charge the earbuds.
One full battery charge provides up to 6 hours of playtime at
maximum volume and up to 9 hours at medium volume.
When the battery is running low, you will hear the “BATTERY
LOW” voice prompt.
To charge the earbuds, plug one end of the supplied cable
into the Micro-USB charging port under the rubber cover of
the right earbud. Plug the other end of the charging cable
into a standard USB port. It takes up to 2 hours to charge
fully.
The LED light will turn red while charging. The red light will
turn blue when the earbuds are fully charged.