Operation Manual

16
4.1 Fill in water
Open the lid, fill the water tank with the desired amount of water and then close the lid. Note: the water
level must be less the Max level.
Tips: Suggest to use purge water in the appliance
4.2 Obtain desired water
Make sure the plug is connected to the proper wall outlet, and fill in the water with the desired amount.
Place your cup on the removable water drip tray and make sure it aligns with the spout. First select the
desired temperature, and press the switch to the ON position, about 5-10s, the desired water will flow out
continuously from the water spout, when you obtain the desired water, press the Switch to OFF position,
the appliance will stop working at once. If you want to obtain water again, only repeat the above
procedure.
Remarks
--Do not touch the boiled water and steam in order to protest against the scald by the boiled water and
hot steam.