Installation Guide

Applying the Tree Trainer to your bent tree.

Your bent tree can be

straightened easily with the

Tree Trainer.

Place long, top strap around

tree and go through ring as

shown.

Insert strap through the ring

once, then wrap around the

tree again, and insert through

ring a second time.

Once through, take the slack

out and pull tight.

Feed the long, top strap

through the bottom side of cam

buckle the proper way.

Push the long, top strap

through the bottom side of cam

buckle so the teeth can grip the

strap.

Place the Tree Trainer with the

insert pad against the tree at

the bend or bow position.

Second strap, bottom, should

be installed (referring to the

above example of the top strap

being installed).

Place long, bottom strap

through bottom side of cam

buckle the proper way.

1 2 3

4 5 6

7 8 9

Push long, bottom strap

through bottom side of cam

buckle and pull through so

teeth can grip strap.

Fold the top and bottom straps

and tie off with a tie strap to

eliminate excess material.

Completed! The Tree Trainer

placed on a tree properly with

the turnbuckle adjusted to

secure itself independently.

10 11 12

PAGE 1
Applying the Tree Trainer to your bent tree. 1 2 Your bent tree can be straightened easily with the Tree Trainer. 4 Place long, top strap around tree and go through ring as shown. 5 Once through, take the slack out and pull tight. 7 10 Feed the long, top strap through the bottom side of cam buckle the proper way. Second strap, bottom, should be installed (referring to the above example of the top strap being installed). Place long, bottom strap through bottom side of cam buckle the proper way.