Instructions / Assembly

1-855-GROW-RIGHT [e-mail] TreeTrainer.com © 2012 Roy Enterprises L.L.C. All Rights Reserved.
Assembling the Tree Trainer.
• Thread the head counter
clockwise into the turnbuckle
(the piece and end with the
“L” signifying left handed
threads).
• Thread the saddle clockwise in
the opposite end of the
turnbuckle with the groove in
the lower end of turnbuckle.
• Thread head and saddle all the
way into the barrel.
• To attach straps, remove
hairpins and clevis pins from
the head. Place loops into
head and insert clevis pin
through the loop end of the
strap and replace hairpin. The
Tree Trainer is now assembled
and ready for use.
• Insert pad into saddle before
applying to bent tree.
Note: “Left Hand”
means to turn
counter clockwise
one end while
threading both
ends together.
Grove signifies
right hand thread.
2
6
7
5
1
1. HEAD
2. SHORT END STRAP
3. CLEVIS PIN
4. HAIR PIN
5. BARREL
6. SADDLE
7. INSERT PAD
PARTS:
3
4
• Thread the head counter
clockwise into the turnbuckle
(the piece and end with the
“L” signifying left handed
threads).
• Thread the saddle clockwise in
the opposite end of the
turnbuckle with the groove in
the lower end of turnbuckle.
• Thread head and saddle all the
way into the barrel.
• To attach straps, remove
hairpins and clevis pins from
the head. Place loops into
head and insert clevis pin
through the loop end of the
strap and replace hairpin. The
Tree Trainer is now assembled
and ready for use.
• Insert pad into saddle before
applying to bent tree.
Note: “Left Hand”
means to turn
counter clockwise
one end while
threading both
ends together.
Grove signifies
right hand thread.
2
6
7
5
1
1. HEAD
2. SHORT END STRAP
3. CLEVIS PIN
4. HAIR PIN
5. BARREL
6. SADDLE
7. INSERT PAD
PARTS:
3
4
A.
B.
C.
D.
E.
Groove or “R”
signifies right hand
turn.