User Manual

ManualsBrandsTrek ManualsEquipment10-40A High-Voltage Power Amplifier

The Model 10/40A is a DC-stable, high-voltage power

amplifier used in industrial and research applications. It

features an all-solid-state design for high slew rate, wide

bandwidth and low-noise operation. The four-quadrant, active

output stage sinks or sources current into reactive or resistive

loads throughout the output voltage range. This type of output is

essential to achieve an accurate output response and high

slew rate demanded by a variety of loads such as highly

capacitive or reactive loads. It is configured as a non-inverting

amplifier.

Trek Model 10/40A

High-Voltage Power Amplifier

Key Specifications

Output Voltage Range:

Output Current Range: peak AC

Slew Rate: Greater than 750 V/

0 to ±10 kV DC or peak AC

0 to ±40 mA DC or

µs

Large Signal Bandwidth (-3 dB): DC to greater than 23 kHz, typical

DC Voltage Gain: 1000 V/V

TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK

(fax) • www.trekinc.com • sales@trekinc.com 716-438-7555 • 716-201-1804

Features and Benefits

Four-quadrant output for driving capacitive loads

Closed loop system for high accuracy

Short-circuit protected for equipment protection

All solid-state design for maintenance free operation

DC-stable for programmable supply applications

Low output noise for ultra-accurate outputs

compliant

NIST-traceable Certificate of Calibration provided with each unit

Typical Applications Include

! Electrostatic deflection

! Electrophoresis

! Electrorheological fluids

! Electro-optic modulation

! Material poling

! AC or DC biasing

! Ion beam steering

! Particle accelerators

! Mass spectrometers

! Material characterization

! Ferroelectrics

! Atmospheric plasma

! Dielectric barrier discharge

Summary of content (2 pages)

PAGE 1
Trek Model 10/40A High-Voltage Power Amplifier The Model 10/40A is a DC-stable, high-voltage power amplifier used in industrial and research applications. It features an all-solid-state design for high slew rate, wide bandwidth and low-noise operation. The four-quadrant, active output stage sinks or sources current into reactive or resistive loads throughout the output voltage range.
PAGE 2
Model 10/40A Specifications Performance Output Voltage Range 0 to ±10 kV DC or peak AC Output Current Range 0 to ±40 mA DC or peak AC (must not exceed 40 mA rms, max) Input Voltage Range 0 to ±10 V DC or peak AC Input Impedance 25 kW, nominal DC Voltage Gain 1000 V/V DC Voltage Gain Accuracy Better than 0.