SDS

2 of 7 pages
Last updated 7/25/2018
Flame Bloc Safety Data Sheet
MSDS ID NO.: Trek7AAAUT Product name: Aqua Armor for Auto Interiors Page 2 of 7
3. COMPOSITION/INFORMATION ON INGREDIENTS
Flame Bloc a complex water dispersion of proprietary copolymers with wetting agents.
Component Information
Name
CAS Number
Weight %
ACGIH Exposure
Limits:
OSHA - Vacated
PELs - Time
Weighted Ave
Other:
Polymer
Trade Secret
NA
NA
NA
Emulsifiers
Trade Secret
Notes: VOC content <3.5%
This substance is not listed into The List of Harmonized Classification and Labelling of Hazardous Substances from Annex I to Directive
67/578/EEC. Not listed on OSHA - List of Highly Hazardous Chemicals, Toxics and Reactive (CFR 29) Not listed on EPA - CONSOLIDATED
LIST OF CHEMICALS SUBJECT TO EPCRA, CERCLA AND CAA SECTION 112(r)
4. FIRST AID MEASURES
Inhalation: Clear lungs of any liquid.
Skin contact: No first aid should be needed. Wash off with soap and water. My sting if it comes in
contact with an open sore.
Ingestion: If swallowed, do not induce vomiting and do not give liquids. Immediately call a
physician.
Eye contact: Flush eyes with large amounts of tepid water for at least 15 minutes. If symptoms or
irritation occur, call a physician.
Medical conditions aggravated by exposure:
Skin contact could aggravate an existing skin disorder or dermatitis condition.
5. FIRE FIGHTING MEASURES
Suitable extinguishing media: Not Flammable
Specific hazards: None
Special protective equipment for firefighters: None
Flash point: NA – Aqueous base solution
Auto ignition temperature: NA
Flammable limits in air - lower (%): NA
Flammable limits in air - upper (%): NA