Use and Care Manual

How To Apply
1. Start with thoroughly clean and dry fabric free of soap residue. Follow the
manufacturer;s directions to remove all soiling and residue
2. Apply outdoors or in a well-ventilated area
3. Test for colorfastness in small inconspicuous area
4. Spray until item is evenly wet slightly overlapping sprays
5. if drops form on surface, wet a sponge with Ray Bloc and gently wipe drop. Do not
allow large drops to dry
6. Allow treated fabric to dry completely.
7. Test for UV protection by sprinkling water on surface. If water beads, you are
protected. If water beading does not appear sufficient, a second application may
be necessary.