User manual

5) Use MultiSpeaker with a Bluetooth®-enabled cellphone

Pair MultiSpeaker to your mobile phone:

a) Place the MultiSpeaker no more than 1 meter away from your cell phone.

b) Ensure that the MultiSpeaker is under off mode. Press and hold the MFB for 6

seconds until you hear two short beeps. The red LED and blue LED will flash

alternately.

c) Activate your mobile handset's Bluetooth® function by referring to your

cellphone's user guide for details. Meanwhile, the handset will search for

accessible Bluetooth® devices. Be sure that your cell phone is visible.

d) Select "MultiSpeaker" from the list of available Bluetooth® devices.

e) When pairing is completed, you hear 2 beeps and the LED will flash blue 3 times.

Now the MultiSpeaker is under standby mode and the blue LED flashes once every

3 seconds.

f) Now you can go back to your mobile phone's main menu and make, answer calls

or playback music using the MultiSpeaker. Please place your phone not more than

10 meters away from the MultiSpeaker, to ensure a good connection.

If the pairing cannot be completed after two minutes, the MultiSpeaker switches off

automatically. Please repeat step c) to f) to pair the MultiSpeaker and the cellphone

again.

Build a connection between an already paired phone and the

MultiSpeaker:

After the MultiSpeaker has been successfully paired to your cellphone, the

MultiSpeaker is automatically set on standby.

The blue LED indicates whether the mobile phone is connected to the MultiSpeaker

or not. It flashes once every 3 seconds if the connection exists and twice every three

seconds when connection is broken. Follow these steps to recover the connection:

a) Turn on Bluetooth® at the MultiSpeaker: Press and hold the Multi-function button

for 4 seconds until you hear a short beep and then the blue LED will stay on for

3 seconds. The MultiSpeaker will automatically reconnect to the last Bluetooth®

device it has been paired with. You will hear two beeps if the connection is

succesfully established. If there is still no connection between your cellphone and

the MultiSpeaker, please check the Bluetooth® settings on your cellphone.

b) Setup the Bluetooth® connetion on your cellphone: Select on your cell phone

MultiSpeaker" from the list of available Bluetooth® devices. Briefly press the

Multi-function button on the MultiSpeaker. Please confirm the connection

to the MultiSpeaker on your mobile phone.