User manual

Instructions for safety and use:

Only qualified persons may perform technical work on the product. The product may not be opened

or changed. The components cannot be serviced by the user.

Never expose the device to moisture, condensation and liquids.

Protect the device from extremely high and low temperatures and temperature fluctuations. Use the

device within an ambient temperature of 5º to 40ºC.

Never place the device close to a source of heat, and protect it from direct sunlight.

Never clean the surface of the device with solvents, paint thinners, cleansers or other chemical

products. Instead, use a soft, dry cloth or soft brush.

In certain circumstances, exposing the device to an electrostatic discharge may interrupt the data

transfer between the device and the computer and impair the functions of the device. If this occurs,

the device should be unplugged from the USB port and then plugged in again.

Do not use USB cables longer than 3 meters.

This device can produce high sound volumes. In order to avoid hearing loss that can occur

immediately, in the future, or gradually, you should not listen at high volumes for extended periods.

This applies regardless of whether you listen with speakers, headphones, or earphones. If you notice

a ringing noise in your ears, lower the volume immediately or stop using the MP3 player. Please keep

in mind that permanent hearing loss can first appear at a later point in time. While you may become

accustomed to higher volumes over time so that they may seem normal to you, your sense of hearing

may still have been impaired by this. The higher you set the volume, the faster your sense of hearing

can be damaged.

Caution LED class 2! LED radiation! Don’t stare into beam. EN 62471:2008

Please do not look directly into the LED and direct the light beam not directly at people or animals

in order to avoid violations of the eyes. The flash function of the flashlight should not be used in the

presence of persons suffering from reflex epilepsies (Photosensitivity).

The manufacturer retains the right to continually improve the product. These changes may be made

without being directly described in these operating instructions. For this reason, the information provided

in these operating instructions may not reflect the current state of the art.

The manufacturer only guarantees suitability for the product's intended purpose. In addition, the

manufacturer is not responsible for damages or loss of data and subsequent consequences.

trademarks or brand names of the respective owner.