Operation Manual

EN
22
5) Logging off and disconnecting the TrekStor
i.Beat clip from the computer
i
Please follow the recommended logout procedure to
prevent damage to the device or data loss!
Windows® 2000/XP/Vista™/7
At the bottom right on the task bar, left-click the "sA f e l y
re m o v e hA r d w A r e " icon. In the popup menu that appears, left-
click "sA f e l y re m o v e mA s s st o r A g e de v i C e - dr i v e " to select it. You
can now disconnect your MP3 player from the computer.
Mac® OS X from 10.4
You must remove the drive from the "de s k t o p " before you
disconnect your MP3 player. Click the relevant drive icon
and drag it to the trash icon.
6) Operation of the TrekStor i.Beat clip
i
Your MP3 player can generate high volumes; for this
reason, make sure that the volume is not too high while
you are listening to it. Further information on this topic can
be found at the end of these operating instructions.
Turning the device on and off
To start your MP3 player, move the w slide switch to
the "on" position. The MP3 player now is in the pause mode,
i.e. you can start playback by briefly pressing the A button.
To activate the standby mode of your MP3 player, hold
down the
A button for approx. 3 seconds. When the
standby mode is activated, your MP3 player automatically
stores the current playback position. The next time the MP3
player is switched on, playback will resume at this position.
When you want to activate your MP3 player from the standby
mode, hold down the
A button for approx. 3 seconds. Your
MP3 player now is in pause mode.