Operation Manual

– 16 –
EN
– 17 –
g) Select "st A r t " + "pr o g r A m s " + "tr e K st o r i.be A t c o d y " to run the "fi r m W A r e up d A t e ". The update program
window opens.
h) Open the firmware (*.rfw) via "o
p e n "; you have previously unzipped this file in your selected folder.
i) Turn on the i.Beat cody. On the i.Beat cody under "s
e t t i n g s " + "sy s t e m ", select the option "up d A t e ".
Confirm with "y
e s ".
j) Connect the i.Beat cody to a USB port of your PC.
Note: If a Windows® security prompt appears, select "C
o n t i n u e i n s t A l l A t i o n ".
k) Start updating the firmware via "u
p d A t e ". Please wait until the update procedure is completely finished.
To prevent damage to your MP3 player, always follow the update procedures exactly and please be patient.
l) Close the update program via "e
x i t ".
m) Disconnect your i.Beat cody from the USB port of your PC.
7) Formatting the TrekStor i.Beat cody
a) Connect the MP3 player to a USB port of your PC.
b) Back up all the important files on your MP3 player onto your PC.
c) Open "m
y co m p u t e r ", and click your right mouse button on your MP3 player ("de V i c e W i t h re m o V A b l e st o r A g e ").
d) Select "f
o r m A t ..." from the context menu.
e) Select the "fAt32" option under "f
i l e s y s t e m " from the dialog window that appears.
f) Click on the "s
t A r t " button to start the formatting.
8) Using the TrekStor i.Beat cody
Turning the device on and off
Turn on your MP3 player by pressing the
A button for approximately 3 seconds. To turn the MP3 player
off again, hold down the
A button for approx. 3 seconds.
Key lock
To activate the key lock, hold the
i button, and simultaneously press the volume wheel/scroll wheel.
Then the key lock symbol will appear in the display of your MP3 player. To deactivate the key lock, hold
down the
i button once more, and simultaneously press the volume wheel/scroll wheel.
Different modes
Your MP3 player has different modes that you can select in the main menu. To reach the main menu from a
mode, hold the
i button for approximately 1 second. Turn the scroll wheel or press the I or J button
to select the desired mode. Confirm your selection by pressing the scroll wheel, or by shortly pressing the
A button.
Note: Turn the scroll wheel faster, or hold down the
I or J button longer to switch faster between the
individual modes.