Operation Manual

When the upgrade is complete, disconnect the set from the
PC. Refer to the “i.Beat cube Safe Unplug/eject.”
● Do not disconnect the product from the PC while upgrade is
in progress.
● Save all the data on the product before initiating the firmware
upgrade.
● To check the Firmware information, choose Registration
Information on the menu. Also the information is displayed
during the boot process.
5
5 7
Choose [Start] [Programs] [TrekStor]
[i.Beat cube] [Firmware Update]
When the driver installation is complete, the following
window will appear.
4
2
5 6
Notice :