User's Manual

• Inside the home menu, press <Menu> to display the option menu.

• Move the cursor to [Settings] and press <OK> to confirm.

Brightness

• With the help of that option, you can set the desired display brightness.

Time and date

You can set the clock and date of the eBook-Reader as follows:

• Use the <Directional Left/Right> buttons to move the cursor.

• Use the Press <Directional Up/Down> buttons to input a value.

• Move finally the cursor to "OK" and confirm your choice with the <OK>

button.

Standby mode

• To enable/disable the auto standby mode (LCD power off) after a set

time.

• To set the eBook-Reader manually into the standby mode, press the

<Power> button shortly. Press shortly the <Power> button to leave the

standby mode again.

Format memory

You can format the internal memory and the memory card.

Caution: All data will be lost! Therefore please backup your data before

performing this.

About

Displays product information about the eBook-Reader (e. g. current

firmware version)

Power management

Displays the battery status of the eBook-Reader.

Restore factory defaults

To restore the eBook-Reader's settings to defaults.

Caution: Loss of all DRM protected eBook/activations – see p. 9

Language

To set system language of the eBook-Reader.

User manual

Displays the digital version of the user guide.

Note: Other languages of the user manual can be found on the TrekStor

website:

http://www.trekstor.de.

Settings