User's Manual

If the eBook-Reader does not work as it is expected, please try the
following steps.
The eBook-Reader is not responding or cannot be turned on.
• Reset the eBook-Reader by pressing the <Power> button for 6 seconds.
The eBook-Reader will be forced to shut down and you can restart the
eBook-Reader again.
• The battery has been fully discharged. Please charge the eBook-Reader
via USB (or USB adapter).
Battery life seems too short
• The operating temperature is below 10
o
C. This is due to the
characteristics of the battery and is not a malfunction.
• The battery was not used for prolonged period. Please recharge the
battery of the eBook-Reader.
• The battery is not fully charged. Please charge the eBook-Reader for at
least 4 hours.
• The battery needs to be replaced. Please contact qualified personnel.
It takes a long time for the display to appear
• This is due to the characteristic of the display panel, especially in low
temperature environment, and not a malfunction.
An eBook cannot be read
• Copyrighted books can be read only by the authorized device. Before
using e. g. Adobe® Digital Editions make sure that your eBook-Reader is
registered.
• Check, if the eBook has expired.
• Check, if the eBook format is supported by the eBook-Reader.
The eBook-Reader cannot be operated during USB connection
• The eBook-Reader cannot be operated while it is connected to PC.
• Disconnect the eBook-Reader from computer to resume operation.
• To use the eBook-Reader while charging, click on the [Safely Remove
Hardware] icon located on the left lower corner to disconnect the data
connection with computer. After the eBook-Reader is safely removed,
the computer will only charge the eBook-Reader and you can now use
it as usual.
FAQ
20