User's Manual

Power on and off the eBook-Reader
• Press and hold the [Power] button for 2 - 3 seconds to turn on the
eBook-Reader.
• It may take a few moments until your eBook-Reader turns on and loads
the contents.
• In case the eBook-Reader does not turn on, charging might be required.
• To turn off the eBook-Reader, press and hold the [Power] button for 2 -
3 seconds.
Charging the eBook-Reader
• You need to charge the eBook-Reader before using it for the first time
or when the battery power is low.
• You can charge the eBook-Reader by:
o Connecting it to PC or another USB adapter via the supplied
USB cable.
• When charging via PC, the eBook-Reader cannot be operated. To use
the eBook-Reader during charging, click "Safely Remove Hardware" on
your desktop but keep the eBook-Reader connected to your PC. After
removing the eBook-Reader safely, you can operate it while charging.
• Please turn the eBook-Reader into the standby mode to shorten the
charging process.
• It will take about 4 hours to fully charge the eBook-Reader in standby
mode (LCD off).
• When the USB power cable is connected to the eBook-Reader for
charging, your eBook-Reader will enter into the standby mode after
remaining idle for 60 seconds. Press the [Power] button to wake the
eBook-Reader up again.
• The battery status is displayed on the bottom of the left corner.
Getting started
3