User's Manual

Inserting a memory card

The eBook-Reader supports microSD/microSDHC memory cards. To insert

a memory card:

• Be sure that the memory card is in the correct position with the contact

pin facing upwards as illustrated below. You may damage the card and

the eBook-Reader, if the memory card is not inserted in the correct way.

• Push the memory card into the card slot until it snaps in.

• To remove the memory card again, push the memory card once again

until it clicks.

• When a memory card is inserted in or ejected from the eBook-Reader,

it may take few seconds for the eBook-Reader to update the content.

• Please avoid inserting or ejecting the memory card when the reader is

running as this may cause a system hang.

• Do not remove the card, if the content on the card is just being played.

This will interrupt the operation of the reader and cause the eBook-

Reader to restart.

• If the system does not respond, press and hold the <Power> button for

approx. 6 seconds to turn it off and reset the reader.

Limitations on NTFS file systems:

• In case your memory card is NTFS formatted, stored eBooks are not

recognized by Adobe® Digital Editions, if the eBook-Reader is

connected to the PC. (Recommended file system: FAT32)

Getting started