Operating Instructions

17
2 Charging the eBook Reader
You need to charge the eBook Reader both before using it
the first time as well as when the battery life is low.
Once you have connected your TrekStor eBook Reader Pyrus
via the included Micro USB cable with a computer or by
using a power supply (e. g. TrekStor USB-Charger e.fx) with a
power outlet, it is charged automatically. After approx. 3
hours the battery is fully charged and the charging process
is stopped automatically to prevent overcharging.
Note: During charging, the status LED lights up. Once
charging is completed, the status LED turns off.
Attention: The maximum battery life is reached after
about 10 charging cycles.
Thanks to the intelligent power saving management of the
eBook Reader Pyrus you can read for weeks with only one
battery charge.
If the eBook Reader is turned on, the battery status is shown
on the upper right corner of the display.