Quick Guide

EN
14
2) First set up
2.1) Charging the Liro Color II
Before the first use, it is recommended to fully charge the Liro Color II.
Connect the DC input connector with the Liro Color II and connect the
power supply to an electrical outlet.
2.2) Getting started
A) After charging the Liro Color II, hold down the power button for
2-3 seconds to switch on the device.
B) After switching on the device, the start screen appears. To set the user
interface to the desired language, please tap inside the applications
menu on "Set tingS" and afterwards on "Language & input".
Tap now in the right column on the first field "Language" and
select your language.
2.3) Connecting the Internet
With the Liro Color II you have the possibility to access the Internet via Wi-Fi.
If you want to establish a connection to a new network, please proceed
as follows:
A) Go via the applications menu to the settings and tap on "Wi-fi" under
"WireLeSS anD netWorkS". In case the Wi-Fi function is not activated yet,
first pull the on/off switch to "on".
B) On the right side all the wireless networks are displayed. Tap on your
preferred network and enter the password into the appropriate field.
C) The Liro Color II then connects with the Internet. Via the browser
symbol you can now surf the Internet as usual.
i
If you have once established a connection to a Wi-Fi network, the Liro Color II
automatically connects to it as soon as it is within reach.
i
To save power, it is advisable to turn off the wireless function, if you do not
need it.