Quick Guide

5) Connecting other devices

5.1) Connecting a PC

A) Connect the Micro-USB connector to the Micro-USB port of the Liro Tab

and the other end of the USB cable to a USB port of your computer.

B) Tap on the screen of the Liro Tab on "turn on uSB Storage".

C) A moment later, the internal memory of the Liro Tab is displayed as an

external drive inside the file explorer of the Computers. From there you

can download files, copy, delete or move them.

If you like to safely remove the Liro Tab from the computer, tap on

"tuRn off usb stoRage" and disconnect it from the computer.

5.2) Connecting a USB device

USB devices, e. g. a hard drive, can be connected via the Micro-USB port.

It might be that the current supply of the Liro Tabs is not enough to fully

guarantee the full function of the connected USB device. Therefore provide

extra current for an external hard drive e. g. via a Y cable.

5.3) Connecting a Bluetooth® device

A) Go via "SettingS" to "BLuetooth®" and set the Bluetooth® function to

"on" in order to search for devices nearby.

B) Tap now on the device that you would like to connect from the

displayed list by tapping on it.

C) Tap now on "pair" and follow any instructions by the Liro Tab or the

device that is supposed to be connected.

5.4) Connecting a TV via HDMI™

A) Go via "SettingS" to "hDMi™" and activate through tapping the HDMI™

function (a check mark appears on the right side of the picture,

once the function is activated).

B) Now connect a Mini-HDMI™ cable (e. g. available on

www.trekstor-onlineshop.de) with one end to the tablet

and with the other end to the TV.

C) Select via the remote Control of your TV the HDMI™ port, to which

the Liro Tab was connected. Surface and contents of the tablets

will now be displayed on the TV screen.