Operating instructions

EN
11
5) Controls and connections
A) Front camera
B) Audio out socket
C) microSD/microSDHC- card slot
D) Rear camera
E) Micro-USB socket
F) Opening slit for the cover
G) Dual SIM slot
H) Volume control +
I) Volume control -
J) On/off switch
K) Reset
L) Fixing point for car cradle
M) Loudspeaker
6) Charging the SurfTab
Please fully charge your SurfTab before you use it for the first time. Connect your
SurfTab to a plug socket using the USB cable and power adapter. After about
3.5 hours SurfTab is fully charged. Charging via a PC generally take longer than
charging via a plug socket.
i
The maximum battery life is reached after approximately ten charging cycles.
7) Switching on the SurfTab
After you have charged your SurfTab, you can switch it on. Press the on/off
switch for three to five seconds to start the device. As soon as the device is
switched on, the lock screen appears. Place your finger on the lock symbol on
the screen and drag the lock symbol to the right to the open lock. Your SurfTab
will now display the home screen.
i
If you are using your new SurfTab for the first time, a configuration assistant
will appear to help you configure the first important settings on your SurfTab.
The settings that you specify here (for example, language or WiFi) can be altered
again later on the applications menu under "SettingS".
i
If you have inserted a SIM card, you must enter the corresponding PIN number
to unlock the screen.